Sanyo SC-CX500 Instruction Manual page 4

CLEAR THE DUST COMPARTMENT /
Remove the dust compartment
and empty dust compartment
as follows.
1. Empty out the dirt, turn the
dust cup in the direction
shown to remove the
dust cup.
2. Remove the prefilter
according to the top of
prefilter arrow.
3. Turn the main filter and
remove the main filter,
as shown in the figure.
4. Clean the each parts with
water.
Allow each parts to dry
completely for 24 hours
after cleaning.
Caution:
Do not attempt to dry with a
hair dryer or by placing in a
clothes dryer. Hot air may
cause the filters to warp.
Don't need to wash after
use each time.
5. Pettaching the dust
compartment, as
shown in the figure.
And rettach to the
vacuum cleaner.
Stopper
Dust cup
Main filter
1
2
Stopper
1.
2.
Pre-Filter
3.
4.
5.
Stopper
1
2