Panasonic NR-B32SX1 Operating Instructions Manual page 6

Refrigerator-freezer
Hide thumbs Also See for NR-B32SX1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Installation
Installing the distance guides
To prevent the condenser (the black backside component with fins)
from touching the wall, put on two plastic distance guides in its place
rotating 90°.
Cleaning
After installation, wipe the appliance clean with warm water.
Connecting the mains plug to the household mains socket
You can connect the mains plug immediately after installation.
After the appliance is plugged, all symbols will appear for a moment, and then the startup values will appear as -18 °C on
freezer setting indicator and 4 °C on fridge setting indicator.
All buttons on the control panel are touch-operated. (Only press to activate the button you want to operate.)
Notes:
• Cooling may take longer in the summer months or at other times when the room temperature is higher.
• If you need to unplug the refrigerator, wait at least 10 minutes before you plug it back in again. If not, you might damage
the compressor.
Ambient room temperature
You'll find your refrigerator's climate classification on the rating plate in the left side of the fridge compartment. It shows
the room temperature the appliance is designed to work in.
Climate classification
SN
(Extended Temperate)
N
(Temperate)
ST
(Subtropical)
T
(Tropical)
For saving energy
1. Install the refrigerator in a dry, cool and well-ventilated location. The colder the ambient temperature, the better the
efficiency. (Please refer to Page 5 for dimensions and clearance.)
2. The combination of drawers and shelves that result in the largest in volume and the most efficient use of energy for the
refrigerator.
• Remove the top two freezer drawers. (Leave the lowest freezer drawer.)
• Attach the drawers and shelves in the refrigerator to the positions illustrated on the section of "Parts" (P.7).
3. Do not over fill the refrigerator to allow the air to circulate.
4. Open the doors only when necessary and as briefly as possible.
5. Occasionally clean the ventilation openings at the bottom of the refrigerator with a vacuum cleaner, etc.
(Take care not to damage the refrigerant pipe inside the cover.)
6. When setting to Super Freeze Mode or Super Cool Mode, power consumption will be increased.
6 6
(continued)
Permitted ambient temperature
+10 °C to 32 °C
+16 °C to 32 °C
+16 °C to 38 °C
+16 °C to 43 °C
Distance guides (accessories)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nr-b32sg1Nr-b32sw1

Table of Contents