Startup Image - Sanyo  Instruction Manual

Resize
Resizes a previously saved image and only resizing to a smaller size is available.
To resize an image:
1. Set the camera to Playback mode
2. Use the or
resize.
3. Press the MENU button to launch the Playback menu.
4. Select Resize. The Resize submenu is displayed on the
LCD monitor.
5. Select size among: 8M, 5M, 3M, and VGA. Available size
settings may vary depending on original image size.
Unavailable settings appear as gray icons in Resize
submenu.
6. After selecting size, a menu selection appears. Select
whether to:
• Overwrite. Save and replace old file with a new one.
• Save As. Save the new file as a new one.
• Cancel. Cancel resize.
7. Press the OK button to save/cancel changes.
Resize function is not available for images with image size set to VGA.

Startup Image

You can specify the startup image from the captured images for camera.
1. Press the MENU button to launch the Playback menu.
2. Select Startup Image. The menu selection appears.
3. Select options:
• System. Use camera default image.
• My Photo. Use the
desired image.
• Off. Disable the startup image.
4. Press the OK button to apply changes.
The startup image will still be displayed startup even if the selected image was
deleted.
.
keys to scroll and select an image to
or keys to scroll and select
55