Video; Still Mode - Panasonic NV-VP30 Operating Instructions Manual

SETUP-menu Video
TV
VCR DVD
SETUP

Video

TV Aspect
AV1 Output

Still Mode

SELECT TAB
NTSC Disc Output
ENTER RETURN
TV Aspect :
The format of TV screens is either 4:3 (standard) or 16:9 (wide-screen).
Choose the 16:9 format if your player is attached to a wide-screen TV set.
If it is attached to a standard TV screen you can choose either 4:3 Pan&Scan
or 4:3 Letterbox (see illustration):
Pan&Scan:
Automatically crops a 16:9 picture and turns it into an optimum 4:3
picture producing neither black bars nor distortions.
4:3 Pan&Scan
This format is not supported by all DVDs.
Video
Letterbox:
Automatic
Black bars will appear at the top and bottom edge of the screen to
PAL 60
allow the reproduction of wide-screen video material on a standard
TV screen.
AV1 Output:
Please check which setting is supported by your TV set.
Please refer to the operating instructions of your TV set.
Video: Standard picture quality
RGB: Set RGB for best picture quality at DVD playback.
Still Mode:
Every picture frame is made up of two fields which are output to the screen one
after the other.
Automatic: The unit automatically selects the optically better type of image.
Field: Poorer quality than a frame-based image; however, the image is less fuzzy.
Frame: Both fields of a picture alternate on the screen. Although the image may be
somewhat fuzzy, its quality is better than that of a field-based still image.
NTSC Disc Output:
To play a NTSC disc, select a TV standard (NTSC/PAL60) that matches the
function of your TV set.
Please refer to the operating instructions of your TV set.
VCR DVD
39