External Recording Control - Panasonic NV-VP30 Operating Instructions Manual

External recording control

VCR / DVD
AV 1
RF OUT
AV 2
Receiver
21-pin scart cable
Others
Remote : VCR 1
EXT LINK : 2
: select
MENU MENU MENU MENU MENU MENU MENU MENU EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT
: return : exit
16
The AV2 input of this VCR is equipped for future use with external equipment having
external timer recording control such as digital satellite receivers. The AV2 input can
Aerial
be set to EXT LINK 1 or EXT LINK 2 depending on the equipment to be connected.
Fully wired 21-pin scart cable is required. Refer also to the manufacturer's instruction
for the external unit.
EXT LINK 2: The VCR will start recording when AV2 input detects the video
RF IN
EXT LINK 1: The VCR recording start and stop time is controlled by a control
TV External recording control
VCR DVD
Press MENU and select Others
Press ENTER
Select EXT LINK 2 or 1
2 / 2
Press MENU to return to the Menu screen.
Press the EXT LINK button to activate the VCR's recording standby mode. As long
EXT LINK
as the Video- or Controlsignal is being transmitted by the Satellite or Digital
Receiver, the VCR will record.
The following screen will be shown
if you selected EXT LINK 2:
Press ENTER to hide the message.
Press the EXT LINK button to stop recording.
Be sure that the timer programmes stored by your VCR do not overlap the ones of
the satellite or digital receiver.
Some external equipment may not work with this function, refer to the operating
instructions for the external unit.
signal and stop recording when the video signal is switched off by
the external unit.
signal sent via the 21-pin scart cable from the external unit, e.g. the
F.U.N. receiver (TU-DSF31).
EXT LINK recording in progress.
ENTER : yes EXT LINK :cancel