On Screen Messages - Panasonic Viera TH-37PX80B Operating Instructions Manual

On screen messages

Message
All tuning data will be erased
Are you sure ?
Are you sure you want to delete this timer ?
Press OK to delete timer
Press RETURN to return
Bad Signal
Child Lock is active !
Press OK to enter PIN
Feature not available
Invalid operation - Please check settings and
connections
Invalid system time. Please exit !
Max. number of Timers already set !
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Selecting Auto Setup will delete
current Profi le and Childlock settings
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
No DVB Service found
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
No module inserted
No Recording - Check media
No Recording - Already recording
No Recording - Unknown reason
No Service
No Signal
PIN incorrect !
Please check settings and connections on
HDMI devices.
Please wait.
Recording this service now
Sending Preset Data Please wait !
Shipping condition completed.
TV can now be switched off.
Software successfully updated
Press EXIT to continue
Software Update failed. Please try again later.
Press EXIT to continue
Timer already expired !
Timer Event Due to Start
DVB 1: BBC1 has been
Programmed for recording at 20:00
Timer incorrect !
Tuner Locked
Please stop recording to operate
Unable to download, Check Equipment
Meaning / Action
•
"Shipping Condition" will erase all tuning data (p. 36).
•
Confi rm correct operation.
•
Confi rm correct operation.
•
The signal is weak. Check the aerial.
•
The selected programme is locked in Child Lock (p. 33).
•
It is not possible to record these sources (COMPONENT / HDMI / PC).
•
Check the Q-Link or VIERA Link connection and setting (p. 44 - 46).
•
Cannot get the time information. Check the connection of the RF
cable.
•
The maximum number of timer programming events is 15.
•
There is a new DVB service or programme.
•
There is a new software available.
•
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
•
Check the CI module inserted completely (p. 31).
•
The tape or disc may be "write protected", missing or damaged.
•
The equipment may already be recording.
•
The recording may not be performed. Check the equipment.
•
Disc or tape may be full.
•
The broadcaster has stopped the service.
•
Check the connection of the RF cable.
•
The PIN number you entered is wrong.
•
Communication error in VIERA Link function (p. 46).
•
A function is in progress.
•
The recorder is recording the programme signal from its own tuner.
You can turn the TV off and leave the equipment recording in the
normal way.
•
Q-Link or VIERA Link programme download is in progress.
•
"Auto Setup" will automatically start when Mains power On / Off
switch is next turned On. (p. 12)
•
The software updating is fi nished.
•
Perform "System Update Search Now" in System Update (p. 31).
If this is still unsuccessful, there may not be any new software
available.
•
Starting time in Timer Programming is already past. Set correctly
(p. 41).
•
This message will appear 2 minutes before timer programming
event due to start.
•
Set Start and End times in Timer Programming correctly (p. 41).
•
If you want to unlock, cancel Direct TV Recording (p. 45 and p. 47)
or Timer Programming (p. 40).
•
The tape or disc is active. Stop the equipment and try again.
57