Timer Recording - Panasonic NV-SJ550AM Operating Instructions Manual

Timer Recording

4-Key Programming
Up to 16 timer programmes, including weekly and daily
programmes, can be recorded up to one month in advance
by setting the timer.
Preparations
– Confirm that the VCR is on.
– Confirm that the TV is on and the VCR viewing channel is
selected.
– Insert a video cassette with an intact erasure prevention
tab.
– Check that the clock is set to the correct time. If it has not
been set, refer to page 10.
– Set the VCR/TV switch
Example (In case of [JET NAVIGATOR] is set to [ON].):
Programme position (channel);
Date;
Starting time;
Ending time;
Tape speed;
Category;
(Present date; 16 October)
Operations
1 Press the PROG./CHECK button
to display the menu for timer
programme on the TV screen.
2 Press the Channel button
position of the desired TV station.
– Every time you select the programme position, the
background changes.
CH DATE ON OFF
2 – – – – – – : – – – – : – –
CATEGORY
– The next item will flash after about 2 seconds.
3 Press the DATE button
TV programme will be broadcast.
CH DATE ON OFF
2 27SA – – : – – – – : – –
CATEGORY
4 Press the ON button
– When it is kept pressed, the indication changes
in 30 minute intervals.
CH DATE ON OFF
2 27SA 2 0 : 0 2 – – : – –
CATEGORY
to [VCR].
2
27 October
20:02
21:30
LP
MUSIC
On Screen Display
CH DATE ON
– – – – – – – – : – – – – : – –
CATEGORY
to select the programme
CH DATE ON OFF
SP 2 – – – – – – : – – – – : – – SP
CATEGORY
to set the date on which the
CH DATE ON OFF
SP 2 27SA – – : – – – – : – – SP
CATEGORY
to set the starting time.
CH DATE ON OFF
SP 2 27SA 2 0 : 0 2 – – : – – SP
CATEGORY
5 Press the OFF button
ending time.
6 Press the SPEED button
speed.
– SP provides standard recording
time, optimum picture and sound
quality.
LP provides double recording
time with slightly reduced picture
and sound quality.
EP provides triple recording time with slightly reduced
picture and sound quality.
Regarding the [A] indication, refer to page 20.
When you play back a tape recorded in the EP mode,
the monaural sound may be unstable.
7 Press the Cursor button (1)
Then, select the desired category by pressing the
Cursor buttons (3421)
CATEGORY SETTING
≥MOVIE
≥MUSIC
≥DRAMA
≥EDUCA
≥DOCUM
– Alternatively, you can set the category on the Navigator
list. (See page 23 for details.)
OFF
– This function is activated when [JET NAVIGATOR] is set
SP
to [ON]. (See page 13.) When [JET NAVIGATOR] is set
to [OFF], procced to the step 9.
8 Press the MENU button
make the previous display appear.
9 Press the TIMER (REC) button
over to the timer recording standby mode.
– When [JET NAVIGATOR] is set to [ON], the
[PROGRAMME IS COMPLETE. REMAINING
PROGRAMME 49.] message appers. (See page 13.)
– When [JET NAVIGATOR] is set to [OFF], the
[PROGRAMME IS COMPLETE.] message appears.
(See page 13.)
– The VCR will be set to the timer recording stanby mode
after about 1 minute if the TIMER (REC) button
pressed.
to set the
CH DATE ON
2 27SA
CATEGORY
to set the desired tape
CH DATE ON
2 27SA
CATEGORY
to select the Category.
.
CATEGORY SETTING
≥SPORT ≥MOVIE ≥SPORT
≥CHILD ≥MUSIC ≥CHILD
≥NEWS ≥DRAMA ≥NEWS
≥OTHER ≥EDUCA ≥OTHER
≥ – – – – – – – – – –
≥DOCUM ≥
END : MENU END : MENU
to
CH DATE ON
2 27SA
CHECK
to switch the VCR
OFF
2 0 : 0 2 2 1 : 3 0 SP
OFF
2 0 : 0 2 2 1 : 3 0 LP
OFF
2 0 : 0 2 2 1 : 3 0 LP
: PROG./CHECK
is not
19