Specifications; Maintenance; Note - Panasonic SC-AK330 Operating Instructions Manual

Specifications

AMPLIFIER SECTION
AK330
RMS
output power
THD 10%, both channels driven
1 kHz
90 W per channel (5 Ω)
(Low channel)
10 kHz
(High channel) 90 W per channel (5 Ω)
Total Bi-Amp power
For South Africa
PMPO
AMPLIFIER SECTION
AK230
RMS
output power
THD 10%, both channels driven
100 W per channel (5 Ω)
1 kHz
Total RMS power
For South Africa
PMPO
FM/AM TUNER, TERMINALS SECTION
Preset station FM 15 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range
87.50 – 108.00 MHz (50 kHz steps)
For Europe
Sensitivity
S/N 26 dB
For others
Sensitivity
S/N 26 dB
75 Ω (unbalanced)
Antenna terminal(s)
Amplitude Modulation (AM)
Frequency range
For Europe, Australia and N.Z.
522 – 1629 kHz (9 kHz steps)
For others
522 – 1629 kHz (9 kHz steps)
520 – 1630 kHz (10 kHz steps)
Sensitivity
S/N 20 dB (at 999 kHz)
Audio performance (Amplifier)
Input sensitivity/Input impedance
Aux 250 mV, 14.7 kΩ
Phone jack
Terminal Stereo, 3.5 mm jack

Maintenance

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
•
Never use alcohol, paint thinner or benzine to clean this unit.
•
Before using a chemically treated cloth, read the instructions that
came with the cloth carefully.
CASSETTE DECK SECTION
Track system
Heads
Record/playback
Erasure
Motor
Recording system
Erasing system
360 W
Tape speed
Overall frequency response
(+3 dB, –6 dB at DECK OUT)
3300 W
NORMAL
S/N
Wow and flutter
Fast forward and rewind time
200 W
DISC SECTION
Discs played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
2000W
(2) CD-R/RW (CD-DA, MP3 formatted
disc)
(3) MP3
Bit rate
MP3
Sampling frequency
MP3
CD
Decoding
Digital filter
1.8 ØV (IHF)
D/A converter
1.5 ØV
Pickup
Wavelength
Beam Source
2.5 ØV (IHF)
(For Norge)
2.2 ØV
Bølgelengde
Laserstyrke
Audio output (Disc)
Number of channels
SPEAKER SECTION
Type
3 way, 3 speaker system (Bass reflex)
Impedance
HIGH
560 ØV/m
LOW
Speaker(s)
Woofer
Tweeter
Super tweeter
Input power (IEC)
HIGH
LOW
Output sound pressure level
Cross over frequency
Frequency range
Dimensions (WxHxD) 240 x 330 x 229 mm
Mass
4 track, 2 channel
Solid permalloy head
Double gap ferrite head
DC servo motor
AC bias 100 kHz
AC erase 100 kHz
4.8 cm/s
35 Hz–14 kHz
50 dB (A weighted)
0.18% (WRMS)
Approx. 120 seconds with
C-60 cassette tape
32 kbps–320 kbps
32 kHz, 44.1 kHz, 48 kHz
44.1 kHz
16 bit linear
8 fs
MASH (1 bit DAC)
780 nm
Semiconductor laser
780 nm
Ingen farlig stråling
sendes ut
2 (Stereo) (FL, FR)
AK330
5 Ω
5 Ω
16 cm cone type
6 cm cone type
Piezo type
90 W (Max)
90 W (Max)
83 dB/W (1.0 m)
2.6 kHz, 10 kHz
37 Hz–23 kHz (–16 dB)
44 Hz–22 kHz (–10 dB)
3.2 kg
For a cleaner, crisper sound
Clean the heads regularly to assure good quality playback and
recording.
Use a cleaning tape (not included).
SPEAKER SECTION
AK230
Type
2 way, 2 speaker system (Bass reflex)
Impedance
Speaker(s)
Woofer 16 cm cone type
Tweeter 6 cm cone type
Input power (IEC) 100 W (Max)
Output sound pressure level
81 dB/W (1.0 m)
Cross over frequency
Frequency range 35 Hz–28 kHz (–16 dB)
50 Hz–26 kHz (–10 dB)
Dimensions (WxHxD) 220 x 330 x 201 mm
Mass
GENERAL
Power supply
For Continental Europe
AC 230 V, 50 Hz
For the United Kingdom, Australia
and N.Z.
AC 230-240 V, 50 Hz
For others AC 220–240V, 50/60 Hz
Power consumption
AK330
AK230 : 174 W
Dimensions (WxHxD)
250 x 330 x 341 mm
Mass
AK330
AK230 : 6.9 kg
Operating temperature range
+5 to +35 °C
Operating humidity range
5 to 90 % RH (no condensation)
Power consumption in standby mode: 0.7 W

Note:

1. Specifications are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
3. The labels "HIGH" and "LOW"
AK330
on the rear of the speakers refer to High
frequency and Low frequency.
5 Ω
4 kHz
2.7 kg
: 238 W
: 7.1 kg
15
RQT7796