Presetting Radio Broadcasts - Panasonic SC-AK44 Operating Instructions Manual

A
B
1
2
3
MHz
MEMO
2
1
3
MHz
Preset channel

Presetting radio broadcasts

There are two methods of presetting stations.
Automatic presetting : All the stations the tuner can receive are
preset.
Manual presetting : You can select the stations to preset and
the order they are preset in.
Up to 12 stations each can be set in the FM and AM bands.
Automatic presetting
A
Do the following once each for FM and AM.
Preparation:
•
Tune to the frequency where presetting is to begin (A page 12).
) ) ) /f
Press and hold [MEMORY ) )
Release the button when frequency begins to change.
The tuner presets all the stations it can receive into the channels in
ascending order. When finished, the last station memorized is tuned
in.
Manual presetting
Preset the stations one at a time.
1 Press [TUNER, BAND] to select the "FM" or "AM".
2 Press [MEMORY )/f ] then press [TUNE/TIME ADJ (3)
or (4)] to tune to the required station.
3 Press [MEMORY )/f ] then press [TUNE/TIME ADJ (3)
or (4)] to tune to select a channel.
4 Press [MEMORY )/f ].
The station occupying a channel is erased if another station is preset
in that channel.
Selecting channels
B
by remote control
Press [TUNER] to select "FM" or "AM".
The unit comes on automatically.
Every time you press the button:
FM ↔ AM
Press the numbered buttons to select the channel.
• To select channel 10 or over
Press [j] then the two digits.
Adjust the volume.
On the main unit
1 Press [TUNER, BAND] to select "FM" or "AM".
2 Press [L, TUNE MODE] to select "PRESET".
3 Press [TUNE/TIME ADJ (3) or (4)] to select the preset channel.
f f ] . f
f
13
RQT5621