Panasonic SC-AK44 Operating Instructions Manual page 3

Recording operations
Before recording (Deck 2 only) ............................ 20
Tape-to-tape recording .......................................... 21
Recording from radio broadcasts ........................ 22
Recording from compact discs ............................ 23
To record special CDs and tracks
(CD Manager function) ............................................. 24
Sound quality/sound field operations
Using the built-in sound quality/
sound field settings .......................................... 25
Enhancing the sound quality ................................ 25
Boosting the super woofer ................................... 25
Varying the sound quality with the manual
equalizer ............................................................ 26
Varying the sound quality with
the acoustic image (Al) equalizer .................... 26
Timer operations
Using the timer ...................................................... 27
Using the play/record timer .......................................... 27
Using the sleep timer ................................................... 29
Reference
Using an external unit ........................................... 29
Troubleshooting guide .......................................... 30
Maintenance ........................................................... 30
Servicenter List (U.S.A.) ........................................ 31
Specifications ......................................... Back Cover
Product Service ...................................... Back Cover
AM loop antenna
(RSA0029-L) .................. 1 pc.
Remote control transmitter .............................................. 1 pc.
•
•
SC-AK44:
(N2QAGB000004)
Batteries ........... 2 pcs.
(R6, AA, UM-3)
SC-AK33, SC-AK22, SC-AK12:
(Silver: N2QAGB000002)
(Black: N2QAGB000010)
THE FOLLOWING APPLIES ONLY IN THE U.S.A.:
CAUTION:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television
reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
¡Reorient or relocate the receiving antenna.
¡Increase the separation between the equipment and re-
ceiver.
¡Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
¡Consult the dealer or an experienced radio/TV technician
for help.
Any unauthorized changes or modifications to this equip-
ment would void the user's authority to operate this device.
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
3
RQT5621