Presetting Radio Broadcasts - Panasonic SC-AK300 Operating Instructions Manual

A
TUNER
PROGR A PR R AM
B
1
1
1 2 3
4 5 6
7 8 9
2
VOLUME VOLUME
PROGRAM
PLAY MODE
2
10 10
Preset channel
0

Presetting radio broadcasts

Remote control only
There are two methods of presetting stations.
Automatic presetting : All the stations the tuner can receive are
preset.
Manual presetting : You can select the stations to preset and the
order they are preset in.
Up to 15 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER] to select "FM" or "AM".
A
Automatic presetting
Do the following once each for FM and AM.
Preparation:
Tune to the frequency where presetting is to begin (A page 12).
Press and hold [PROGRAM].
Release the button when frequency begins to change.
The tuner presets all the stations it can receive into the channels in
ascending order. When finished, the last station memorized is tuned
in.
Manual presetting
Preset the stations one at a time.
1 Press [PROGRAM] then press [g/REW/3] or
[4/FF/f] to tune to the required station.
2 Press [PROGRAM] then press [g/REW/3] or
[4/FF/f] to select a channel.
3 Press [PROGRAM].
The station occupying a channel is erased if another station is preset
in that channel.
B
Selecting channels
1
Press the numbered buttons to select
the channel.
To enter channels 10 or over
Press [ 10], then the two digits.
OR
Press [PLAY MODE] to select
1
"PRESET".
Press [g/REW/3] or [4/FF/f]
2
to select the channel.
2
Adjust the volume.
13
RQT6131