Samsung SyncMaster 400DX-3 User Manual page 13

However, the picture may display abnormally if the connected external
input signal is different from the selected video signal.
• A TV tuner box (sold separately) must be connected to use the TV.
• MagicInfo can only be enabled when a network box is connected.
PIP button
Push the PIP button to turn the PIP screen On / Off.
• PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort / TV(Sold separately)
• DVI : PC
• AV : PC / TV(Sold separately)
• Conponent : TV(Sold separately)
• HDMI1 : PC
• HDMI2 : PC
• DisplayPort : PC / TV(Sold separately)
• TV(Sold separately) : PC / AV / DisplayPort
Power button [
Use this button for turning the LCD Display on and off.
Brightness Sensor (Optional)
Automatically detects the surrounding brightness.
Note
This function is activated only on the models equipped with an auto bright-
ness sensor.
Power indicator
Shows PowerSaver mode by blinking green
Note
See PowerSaver described in the manual for further information regarding
power saving functions. For energy conservation, turn your LCD Display
OFF when it is not needed or when leaving it unattended for long periods.
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
Rear
Note
See the "Connections" section for details about cable connections. The LCD Display's con-
figuration at the back may vary slightly depending on the model.
Introduction
]