Digital Zoom Function; Image Stabilizer Function; Fade In/Out Functions - Panasonic NV-MX500B Operating Instructions Manual

Digital Zoom Function

This function is useful when you want to record close-up
shots of subjects located beyond a normal zoom range of 1k
to 10k magnification. With the Digital Zoom Function, you
can select a magnification of 20k or even to 500k.
1
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[D.ZOOM] >> [20k] or [500k].
(26)
SHUTTER/IRIS/
VOL/JOG
(51)
≥20k: Digital zooming to 20k
≥500k: Digital zooming to 500k
D.ZOOM
2
Push the [W/T] Lever (29)
to zoom in or out.
W T
(29)
To Cancel the Digital Zoom Function
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[D.ZOOM] >> [OFF].
≥For other notes concerning this item, see

Image Stabilizer Function

If the Movie Camera might be shaken while recording, the
camera shake in the image can be corrected.
≥If the Movie Camera shakes too much, this function may
not be able to stabilize images.
1
Press the [OPTICAL IMAGE STABILIZER] Button
repeatedly until the [[] Indication appears.
2
Press the Recording Start/Stop Button
[PHOTO SHOT] Button
(25)
PHOTO
SHOT
(32)
MEGA OIS (Optical Image Stabilizer) Function
This function increases the effect. We recommend using
MEGA OIS (Optical Image Stabilizer) Function when
performing Card Photoshot Function.
PUSH
20tW T
towards [W] or towards [T]
.
-42-
(5)
MEGA
OPTICAL IMAGE
STABILIZER
(32)
or
(25)
to start recording.
Camera Mode
3
Press the [OPTICAL IMAGE STABILIZER] Button
repeatedly until the [
To Cancel Image Stabilizer
Press the [OPTICAL IMAGE STABILIZER] Button
repeatedly until neither the [[] nor the [
Indication appears.
≥For other notes concerning this item, see

Fade In/Out Functions

Fade In
Fade In brings out images and sounds gradually from a black
screen at the beginning of a scene.
1
Keep pressing the [FADE] Button
Recording Pause Mode.
≥The image fades out gradually.
2
When the image is completely gone, press the
Recording Start/Stop Button
(5)
3
Release the [FADE] Button
starting recording.
≥The image reappears gradually.
Fade Out
Fade Out causes images and sounds to disappear gradually,
leaving a black screen at the end of a scene.
1
Keep pressing the [FADE] Button
≥The image fades out gradually.
-16-
[] Indication appears.
MEGA
MEGA
(5)
MEGA
OPTICAL IMAGE
STABILIZER
[]
MEGA
.
-42-
(7)
during the
(7)
FADE
(32)
to start recording.
(32)
(7)
about 3 seconds after
(7) while recording.
(7)
FADE
(5)