Hooking Up; Inserting Wireless Adapters - Sony WAHT-SA10 Operating Instructions Manual

Inserting wireless
adapters
1
Insert the wireless transceiver
(supplied) in the slot on the rear
of the surround amplifier.
(not supplied)
mmJ
• Insert the wireless adapter (not supplied)
with the S-AIR logo facing up. Also,
make sure the'" marks on the wireless
adapter (not supplied) and the slot on the
S-AIR main unit are aligned when
inserting.
• Do not touch the terminal of the wireless
adapter.
The illustration of the rear panel of an
S-AIR main unit is an example. Not all
S-AIR main units look exactly the
same.
Rear panel
2
Insert the wireless adapter (not
supplied) in the slot on the S-AIR
main unit.
If a wireless adapter is not supplied
with your S-AIR main unit, you can
purchase a wireless transmitter EZW-
TlOO.
For details, refer to the operating
instructions of the S-AIR main unit.
Hooking Up
om
• Insert the wireless transceiver (supplied)
with the S-AIR logo facing up. Also,
make sure the'" marks on the wireless
transceiver (supplied) and the slot on the
surround amplifier are aligned when
inserting.
• Do not touch the terminal of the wireless
adapter.
Connect the surround amplifier to your
S-AIR main unit.
Before installing, make sure to
remove the AC power cords
(mains leads) of all S·AIR
products from wall outlets
(mains).