Hooking Up The Components; Unpacking - Sony TA-E1 Operating Instructions (primary manual) Operating Instructions Manual

Hi-fi receivers: stereo preamplifier

Hide thumbs Also See for TA-E1 Operating Instructions (primary manual):

Table of Contents

Available languages

Enlarged version

Hooking Up

the

Components

This chapter describes how to connect

an amplifier as well as various audio

components to the preamplifier. Be

sure to read the sections for the

components you have before you

actually connect them to the

preamplifier.

Check that you received the following items with the unit:

• Audio cord (1)

• AC power cord (1)

• AC power plug adapter (3 to 2 prong polarized type) (1)

(USA/Canada only)

Before you get started

• Turn off the power to all components before making

any connections.

• Do not connect the AC power cords until all of the

connections are completed.

• Be sure to make connections firmly to avoid hum and

noise.

• When connecting an audio cord, be sure to match the

color-coded pins to the appropriate jacks on the

components: white (left) to white; and red (right) to

red.

Table of Contents

Chapters

Table of Contents