Panasonic Lumix DMC-FS22 Operating Instructions Manual page 129

The LCD monitor becomes darker or brighter for a moment.
•
This phenomenon appears when you press the shutter button halfway to set the aperture value
and does not affect the recorded pictures.
•
This phenomenon also appears when the brightness changes when the camera is zoomed or
when the camera is moved. This is because of operation of the automatic aperture of the
camera, and it is not a malfunction.
The LCD monitor flickers indoors.
•
The LCD monitor may flicker for a few seconds after the power is switched on. This is an
operation to correct flicker caused by lighting such as fluorescent lights, LED lights etc. and is
not a malfunction.
The LCD monitor is too bright or dark.
•
Is [LCD Mode] active?
Black, red, blue and green dots appear on the LCD monitor.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the LCD monitor.
•
In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
The flash is not activated.
•
Is the flash setting set to [Œ]?
> Change the flash setting.
•
Flash Mode is not available when [Burst]
Flash is activated several times.
•
The flash is activated twice when Red-Eye Reduction
•
Has [Flash Burst] (P60)
LCD monitor
(P38)
(P68)
(P82)
in Scene Mode been set?
- 129 -
Others
Flash
in [Rec] Mode menu has been set.
(P68) has been set.