1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Digital Camera
  5. DMC FS7P - Lumix Digital Camera
  6. Service manual

Panasonic Lumix DMC-FS7P Service Manual

Hide thumbs Also See for Lumix DMC-FS7P:
Table of Contents

Advertisement

Quick Links

Download this manual
DMC-FS7P
Model No.
DMC-FS7PC
DMC-FS7PR
DMC-FS7PU
DMC-FS7EB
DMC-FS7EE
DMC-FS7EF
DMC-FS7EG
DMC-FS7EP
DMC-FS7GC
DMC-FS7GD
DMC-FS7GJ
DMC-FS7GK
DMC-FS7GN
DMC-FS7GT
Vol. 1
Colour
(S)...........Silver Type (except PC/EF/GD/GT)
(K)...........Black Type (except GJ/GT)
(P)...........Pink Type (except GK)
(A)...........Blue Type (except PR/EB/GD/GJ/GN/GT)
(G)...........Green Type
(except PR/EB/GC/GD/GJ/GK/GN)
© Panasonic Corporation 2009. Unauthorized copy-
ing and distribution is a violation of law.
ORDER NO. DSC0902005CE
B26

Digital Camera

Advertisement

Table of Contents
loading

Related Manuals for Panasonic Lumix DMC-FS7P

Summary of Contents for Panasonic Lumix DMC-FS7P

  • Page 1: Digital Camera

    DMC-FS7GK DMC-FS7GN DMC-FS7GT Vol. 1 Colour (S)...Silver Type (except PC/EF/GD/GT) (K)...Black Type (except GJ/GT) (P)...Pink Type (except GK) (A)...Blue Type (except PR/EB/GD/GJ/GN/GT) (G)...Green Type (except PR/EB/GC/GD/GJ/GK/GN) © Panasonic Corporation 2009. Unauthorized copy- ing and distribution is a violation of law.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precaution -------------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure 1.)--------3 1.4. How to Discharge the Capacitor on Flash Top PCB------------------------------------------------------------4 2 Warning --------------------------------------------------------------5 2.1.

  • Page 3: Safety Precaution

    1 Safety Precaution 1.1. General Guidelines 1.3. Leakage Current Hot Check (See Figure 1.) 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment 1. Plug the AC cord directly into the AC outlet. Do not use which are important for safety. These parts are marked by an isolation transformer for this check.

  • Page 4: How To Discharge The Capacitor On Flash Top Pcb

    1.4. How to Discharge the Capacitor on Flash Top PCB CAUTION: 1. Be sure to discharge the capacitor on FLASH TOP PCB. 2. Be careful of the high voltage circuit on FLASH TOP PCB when servicing. [Discharging Procedure] 1. Refer to the disassemble procedure and Remove the necessary parts/unit. 2.

  • Page 5: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD).

  • Page 6: Caution For Ac Cord(For Eb

    2.3.2.3. How to Replace the Fuse A replacement fuse cover can be purchased from your local Panasonic Dealer. 1. Remove the Fuse Cover with a screwdriver. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety.

  • Page 7: How To Replace The Lithium Battery

    NOTE: This Lithium battery is a critical component. (Type No.: ML-421S/DN Manufactured by Energy Company, Panasonic Corporation.) It must never be subjected to excessive heat or discharge. It must therefore only be fitted in requirement designed specifically for its use.

  • Page 8: Service Navigation

    3 Service Navigation 3.1. Introduction This service manual contains technical information, which allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual. 3.2.
  • Page 9 3.2.1. When replacing the 1st lens frame unit By referring the "Method-1" and "Method-2", confirm the Lens type and replace to the applicable 1st lens frame unit. 3.2.1.1. Difference & Distinguish points of the 1st lens frame unit...

  • Page 10: General Description About Lead Free Solder (Pbf)

    3.3. General Description About Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin (Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30°C (86°F) more than that of the normal solder.

  • Page 11: How To Define The Model Suffix (Ntsc Or Pal Model)

    3.5. How to Define the Model Suffix (NTSC or PAL model) There are seven kinds of DMC-FS7, regardless of the colours. • a) DMC-FS7P/PC • b) DMC-FS7EB/EF/EG/EP/GN • c) DMC-FS7EE • d) DMC-FS7GT • e) DMC-FS7GK • f) DMC-FS7GD • g) DMC-FS7PR/PU/GC/GJ What is the difference is that the “INITIAL SETTINGS”...

  • Page 12: Initial Settings

    3.5.2. INITIAL SETTINGS: After replacing the MAIN PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following proce- dure in accordance with model suffix of the unit. 1. IMPORTANT NOTICE: Before proceeding Initial settings, be sure to read the following CAUTIONS. 2.
  • Page 13 [CASE 1. After replacing MAIN P.C.B.] When MAIN P.C.B. has just been replaced, all of the model suffix is displayed as follows. (Four pages in total) [CASE 2. Other than “After replacing MAIN P.C.B.”] • Step 5. Chose the model suffix in “INITIAL SETTINGS”: (Refer to “CAUTION 1”) [Caution: After replacing MAIN P.C.B.] The model suffix can been chosen, JUST ONE TIME.
  • Page 14 • Step 7. Set the model suffix in “INITIAL SETTINGS”: Press the “[ RIGHT ] of Cursor buttons”. The only set area is displayed, and then press the “[ RIGHT ] of Cursor buttons” after confirmation. (The unit is powered off automatically.) •...

  • Page 15: Specifications

    4 Specifications...

  • Page 16: Location Of Controls And Components

    22 Card/Battery door 23 Release lever 24 DC coupler cover When using an AC adaptor, ensure that the Panasonic DC coupler (DMW-DCC4; optional) and AC adaptor (DMW-AC5PP; optional) are used.

  • Page 17: About The Battery

    Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.

  • Page 18: Service Mode

    6 Service Mode 6.1. Error Code Memory Function 1. General description This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the latest. When the error is occurred more than 16, the oldest error is overwritten in sequence. The error code is not memorized when the power supply is shut down forcibly (i.e.,when the unit is powered on by the battery, the battery is pulled out) The error code is memorized to FLASH ROM when the unit has just before powered off.
  • Page 19 • 3. Error Code List The error code consists of 8 bits data and it shows the following information.
  • Page 20 Important notice about "Error Code List" 1) About "*" indication: The third digit from the left is different as follows. - In case of 0 (example: 18001000) When the third digit from the left shows "0", this error occurred under the condition of INITIAL SETTINGS has been completed.

  • Page 21: Service Fixture & Tools

    7 Service Fixture & Tools 7.1. Service Fixture and Tools The following Service Fixture and tools are used for checking and servicing this unit.

  • Page 22: When Replacing The Main Pcb

    7.2. When Replacing the Main PCB After replacing the MAIN PCB, be sure to achieve adjustment. The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in “TSN system”, together with Maintenance software. 7.3. Service Position This Service Position is used for checking and replacing parts.

  • Page 23: Disassembly And Assembly Instructions

    8 Disassembly and Assembly Instructions 8.1. Disassembly Flow Chart 8.2. PCB Location...

  • Page 24: Disassembly Procedure

    8.3. Disassembly Procedure 8.3.1. Removal of the Rear Case Unit and Front Case Unit Item Removal Rear Case Unit (Fig. D1) Card Front Case Unit Battery 1 Screw (A) 3 Screws (B) 2 Screws (C) Side Ornament (L) Jack Door (Fig.
  • Page 25 8.3.2. Removal of the LCD Unit (Fig. D2) (Fig. D3)
  • Page 26 8.3.3. Removal of the Top Operation Unit (Fig. D4) 8.3.4. Removal of the Flash Top P.C.B. (Fig. D6) (Fig. D5)
  • Page 27 (Fig. D7) 8.3.5. Removal of the Lens Unit (Fig. D9) 8.3.6. Removal of the Main P.C.B. (Fig. D8) (Fig. D10)
  • Page 28 8.3.7. Removal of the SD FPC Unit (Fig. D11) (Fig. D13) 8.3.8. Removal of the Battery Case Unit (Fig. D12)

  • Page 29: Disassembly Procedure For The Lens

    8.4. Disassembly Procedure for the 8.3.9. Removal of the Battery Door Unit Lens NOTE: When Disassembling and Assembling for the Lens (Fig. D14) NOTE: (When Assembling) Be sure to confirm the following points when assembling. • The Screw is tightened enough. •...

  • Page 30: Removal Of The Zoom Motor Unit

    8.4.1. Removal of the Zoom Motor Unit 6. Push the drive unit to the indicated by arrow from lens side, and then remove the unit of 1st lens frame/2nd lens and Lens FPC P.C.B. Unit frame move unit from the drive/direct/fixed frame unit. 1.

  • Page 31: Assembly Procedure For The Lens

    8.5. Assembly Procedure for the 8.5.3. Assembly for the 1st Lens Frame Unit and Drive/Direct/Fixed Frame Lens Unit 8.5.1. Phase alignment of the Direct Frame and Drive Frame Unit 8.5.2. Phase alignment of the Drive/Direct Frame Unit and Fixed Frame Unit...
  • Page 32 8.5.4. Assembly for the Master Flange Unit/2nd Lens Frame Move Unit and Drive/Direct/Fixed Frame/1st Lens Frame Unit...

  • Page 33: Removal Of The Ccd Unit

    8.6. Removal of the CCD Unit 8.7. Applyment Grease Method To prevent the CCD unit from catching the dust and dirt, do not remove the CCD unit except for replacing. The grease apply point of lens unit are as follows. Apply grease additionally in the specified position if necessary.

  • Page 34: Measurements And Adjustments

    9 Measurements and Adjustments 9.1. Matrix Chart for Replaced Part and Necessary Adjustment The relation between Replaced part and Necessary Adjustment is shown in the following table. When concerned part is replaced, be sure to achieve the necessary adjustment(s). As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software. The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website”...

  • Page 35: Maintenace

    10 Maintenace 10.1. Cleaning Lens and LCD Panel Do not touch the surface of lens and LCD Panel with your hand. When cleaning the lens, use air-Blower to blow off the dust. When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface. Note: The Lens Cleaning KIT ;...
  • Page 36 DSC0902005CE S1. About Indication of The Schematic Diagram Service Manual S1.1. Important Safety Notice COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS Diagrams and Replacement FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE. 1.Although reference number of the parts is indicated on the P.C.B. drawing and/or Parts List schematic diagrams, it is NOT mounted on the P.C.B.

  • Page 37: S2. Voltage Chart

    S2. Voltage Chart Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester. S2.1.

  • Page 38: S3. Block Diagram

    S3. Block Diagram S3.1. Overall Block Diagram (33mm ~ 132mm) IC3001 CCD SIGNAL PROCESSOR X6001 (24MHz) 1/2.5" 10 MEGA PIX CDS, AGC, A/D, TG, CCD DRIVER ZOOM OIS UNIT IRIS SHUTTER FOCUS IC3002 CARD REGLATOR IC9101 SYSTEM IC MOTOR DRIVE, OIS DRIVE&...

  • Page 39: S4. Schematic Diagram

    S4. Schematic Diagram S4.1. Interconnection Diagram ET8001 FLASH TOP P.C.B. M8001 (COMPONENT SIDE) : (FOIL SIDE) MICROPHONE PS8001 P8002 ET8002 SPEAKER BATTERY FP9005 SDCD SDDAT2 SDDAT3 SDCMD SDDAT0 SDDAT1 SDWP SD FPC UNIT D GND D GND D GND SDCLK FRAME GND FRAME GND FRAME GND...

  • Page 40: S4.2. Flash Top Schematic Diagram

    S4.2. Flash Top Schematic Diagram CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH THE SAME TYPE 1.25A 32V FUSE. REPLACE ONLY WITH THE SAME TYPE 1.5A 32V FUSE. ATTENTION: POUR UNE PROTECTION CONTINUE LES RISQUES ATTENTION: POUR UNE PROTECTION CONTINUE LES RISQUES 1.5A 32V 1.25A 32V...

  • Page 41: S4.3. Lens Flex Schematic Diagram

    S4.3. Lens Flex Schematic Diagram POSITIVE VOLTAGE LINE ENC VCC LED CONT PHOTO CO. BARREL ENCODER SENSOR XVO+ (FULL RETRACT) XVH- HALL SENSOR (X) XVO- XVH+ OIS UNIT XDRV- DRIVE COIL (X) XDRV+ STAP STAP DC SOLENOID LENDET IN (IRIS) LENDET OUT1 STAN STAN...

  • Page 42: S5. Print Circuit Board

    S5. Print Circuit Board S5.1. Flash Top P.C.B. (Component Side) (Foil Side) DMC-FS7 Flash Top P.C.B.

  • Page 43: S5.2. Lens Flex P.c.b

    S5.2. Lens Flex P.C.B. ZOOM MOTOR SHUTTER UNIT UNIT OIS UNIT CO. BARREL ENCODER (FULL RETRACT) Pin 1 ZOOM ENCODER 2 ZOOM ENCODER 1 Pin 45 FOCUS MOTOR UNIT DMC-FS7 LENS FLEX P.C.B.

  • Page 44: S6. Replacement Parts List

    ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES section. Definition of Parts supplier: 1. Parts marked with [ENERGY] in the remarks column are supplied from Panasonic Corporation Energy Company. 2. Parts marked with [SPC] in the remarks column are supplied from AVC-CSC-SPC.
  • Page 45 DMC-FS7P/PC/PR/PU/EB/EE/EF/EG/EP/GC/GD/GJ/GK/GN/GT VEP58076A Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VEP56074B MAIN P.C.B. 1 (RTL)E.S.D. ------ P.C.B. LIST ------  2 ML-421S/DN BUTTON BATTERY 1 (B9101)[ENERGY] VEP56074B MAIN P.C.B. (RTL)E.S.D. VEK0N16 SD FPC UNIT VEP58076A FLASH TOP P.C.B.
  • Page 46 DMC-FS7P/PC/PR/PU/EB/EE/EF/EG/EP/GC/GD/GJ/GK/GN/GT Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VXW1000 LENS UNIT(W/O CCD) 1 [SPC] VPF1302 CAMERA BAG 1 P,PC,PU VDL2317 OPTICAL FILTER 1 [SPC]  201 DE-A59BA/SX BATTERY CHARGER 1 P,PC,PU VEK0N42 CCD UNIT 1 [SPC]E.S.D.
  • Page 47 DMC-FS7P/PC/PR/PU/EB/EE/EF/EG/EP/GC/GD/GJ/GK/GN/GT Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VPF1302 CAMERA BAG 1 EXCEPT P,PC,PU VQT1W19 O/I SOFTWARE 1 EE  301 DE-A60AA/SX BATTERY CHARGER 1 EB,EF,EG,EP,GN (RUSSIAN/UKRAINIAN)  301 DE-A60BA/SX BATTERY CHARGER 1 EE,GC,GD,GJ,GK VQT1W17 O/I SOFTWARE...

  • Page 48: S7. Exploded View

    S7. Exploded View S7.1. Frame and Casing Section 34-1 B100 B101 B102 B103 B104 B107 B105 B106 S-13...

  • Page 49: S7.2. Packing Parts And Accessories Section (1

    S7.2. Packing Parts and Accessories Section (1) S-14...

  • Page 50: S7.3. Packing Parts And Accessories Section (2

    S7.3. Packing Parts and Accessories Section (2) (DMC-FS7EE/EF/EG/EP/GC/GD/GJ) (DMC-FS7EB/GC) (DMC-FS7GN) (DMC-FS7GK/GT) (DMC-FS7PR) S-15...

This manual is also suitable for:

Lumix dmc-fs7puLumix dmc-fs7ebLumix dmc-fs7pcLumix dmc-fs7eeLumix dmc-fs7efLumix dmc-fs7eg ... Show all

Table of Contents