Table of Contents
Advertisement
Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (
Press [OK] to show the following settings:
Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions. Enter the 4-digit
password with the number buttons when the password
screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥Depending on contents, this function effect will not
work.
≥Select "Off" when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit's
time to match your location.
≥Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
Summer Time
≥Select "On" when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
Others
Remote Control
Change the remote control code if other Panasonic products
react to this remote control.
Quick Start*
Speed of startup from standby mode is increased.
≥ Internal control unit will be powered when it is set to "On" so
compared to when the setting is "Off" the following will occur.
jIdle power consumption will increase. (More about the
power consumption
49)
*Depending on the power conserving setting activated on the
TV, this function may have less effect when the unit is
started by the power on link function. (
36) (VIERA CAST)
33)
Easy setup (
19)
You can execute basic settings to optimize your home theatre
system.
Default Settings
This returns all values in the Setup menu and the playback
menu, except for "Remote Control", "LAN Connection Mode",
"Wireless Settings", "IP Address / DNS Settings", "Proxy
Server Settings", "Lock", "DVD-Video Ratings" and "BD-Video
Ratings" etc. to the default settings.
DivX Registration (
28)
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
System Information
Display firmware version of this unit.
[BTT362] Also display wireless LAN module.
Firmware Update (
22)
Press [OK] to show the following settings:
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned
on and you can update it if necessary.
Update Now
You can update the firmware manually if a firmware update
is available.
Speaker check
1 Select "Test" and press [OK].
A test signal is output.
Front (L) ,) Front (R)
2 Press [OK].
The test signal stops.
≥ No signal is output for the subwoofer. To adjust its
volume, see page 24, "Adjusting speaker level during
play".
L
Complete
Test
A Test
To finish the speaker setting
Press [3, 4, 2, 1] to select "Complete" and press [OK].
R
dB
0
SW
VQT3M52
43
Hide quick links:
Advertisement
Table of Contents
