Panasonic SC-BTT362 Operating Instructions Manual page 21

Network Easy Setting (Home Network Connection Check)
Network Easy Setting (Home Network Connection Check)
Complete.
1. LAN cable connection : Fail
2. IP address setting : Fail
3. Connection to gateway : Fail
LAN cable is not connected.
Please check the connection.
Select "Yes" and press [OK] to check network
connection again.
Select "No" and press [OK]
to finish Network Easy Setting.
Yes
OK
Display
1. LAN cable connection or
Wireless Settings
2. IP address setting
3. Connection to gateway
1. LAN cable connection or
Wireless Settings
2. IP address setting
3. Connection to gateway
1. LAN cable connection or
Wireless Settings
2. IP address setting
3. Connection to gateway
No
Check the
following
≥ Connection of
:Fail
the LAN
cables ( 17)
:Fail
:Fail
≥ Connection
:Pass
and settings of
the hub and
:Fail
router
:Fail
≥ Settings of "IP
Address /
:Pass
DNS Settings"
:Pass or ( 42)
Home
network
available
:Fail
Network Easy Setting (Internet Connection Test)
Network Easy Setting (Internet Connection Test)
Complete.
- Connection to the Internet : Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the countermeasure for it.
Press [OK].
OK
Display
≥ "Primary DNS" and "Secondary
Cannot find the server.
(B019)
≥ The server may be busy or the
Failed to connect to the
server.
(B020)
≥ Settings of "Proxy Server
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting "Network Easy Setting" in
the Setup menu. ( 42)
≥ You can redo these settings individually using "Network Settings". (
[BTT362]
≥ Do not use this unit to connect to any wireless network for which you do not
have usage rights.
During automatic searches in a wireless network environment, wireless
networks (SSID) for which you do not have usage rights may be
displayed; however, using these networks may be regarded as illegal
access.
≥ After performing network settings on this unit, the settings (encryption level,
etc.) of the Wireless router might change.
When you have trouble getting online on your PC, perform the network
settings on your PC in accordance with the settings of Wireless router.
≥ Please be aware that connecting to a network without encryption may
result in the content of the communication being illegitimately viewed by a
third party, or the leaking of data such as personal or secret information.
Check the following
DNS" settings of "IP Address /
DNS Settings" ( 42)
service may have been
suspended. Please wait a few
moments, and then try again.
Settings" ( 43) and the router.
42)
VQT3M52
21