Panasonic NV-MV21GH Operating Instructions Manual page 6

Auto Tuning Using the On Screen Display
Introduction
The VCR is tuned automatically by Plug in Auto Tuning.
However, Auto Tuning using the On Screen Display should be
performed according to the following method if necessary.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR and select any programme position except
AV.
Operations
1 Press [MENU] (9) to display the
Main menu on the TV screen.
2 Press [43] (28) to select
[TUNER PRESET] then press
[ENTER] (26).
3 Press [43] (28) to select
[AUTO TUNE] then press [2 1]
(28) to start the Auto Tuning.
• When Auto Tuning is completed,
the On Screen Display
disappears and programme
position 1 is selected.
Channels that can be received
SYSTEM VHF
B CCIR Standard
E2-E12
G (B.G.H)
Hong Kong
Special
I Administrative
Region of China,
UK (I)
East Europe
R1-R12
D
(D.K.K1)
K
China (D) C1-C12
Notes:
• Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
• Auto Tuning takes 5 or more minutes to complete its search.
MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY 0PROG.
SELECT : , ENTER
END : MENU
MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY 0PROG.
SELECT : , ENTER
END : MENU
TUNER PRESET
CH 1
CLEAR
AUDIO SYSTEM
COLOUR SYSTEM
AUTO TUNE
SEARCH
FINE
END : MENU
SELECT:
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 1 SEARCH
END : MENU
The number displayed here
is the number of channels
still to be auto tuned.
UHF CATV
S01-S05
M1-M10
E21-E69
U1-U10
S21-S41
s s
E21-E69
E21-E69 44-470 MHz
C13-C57 Z1-Z35
Manual Tuning Procedure
If the VCR is not correctly tuned by Auto Tuning, follow the
procedure below.
1 Press [MENU] (9) to display the Main menu on the TV
screen.
2 Press [43] (28) to select [TUNER PRESET] then
press [ENTER] (26).
3 Press [43] (28) to select [CH] then select the channel
number you want to tune by pressing [2 1] (28).
4 Confirm that [CLEAR] is set to [OFF].
5 Press [43] (28) to select [AUDIO SYSTEM] then
select the broadcasting system by pressing
[2 1] (28).
BG: PAL B.G.H/SECAM B.G
I: PAL I
DK: PAL D/SECAM D.K.K1
6 Press [43] (28) to select [COLOUR SYSTEM] then
select [AUTO] by pressing [2 1] (28).
• The VCR automatically distinguishes between PAL and
SECAM broadcasts.
• If the picture lacks of colour when [AUTO] is selected,
select [MESECAM] or [PAL].
7 Press [43] (28) to select [SEARCH] then press [2 1]
(28) to start the Manual Tuning.
[ OFF ]
[ I ]
• If the desired TV station has not been tuned, press
AUTO
[ ]
[2 1] (28) again.
[ 3 ]
• Press [MENU] (9) and repeat steps 3-7 for each
programme position you want to tune to a station.
100
CH 2 SEARCH
END: MENU
8 Press [MENU] (9) three times to exit the On Screen
Display.
Direct Tuning
Follow steps 1 to 4 of Manual Tuning Procedure.
5
Press [43] (28) to select [SEARCH].
6
Press [Numeric] (3) to enter the number of the desired
programme position.
• For other channels that require tuning, repeat steps 3, 4,
5 6
, .
7
Press [MENU] (9) twice to exit the On Screen Display.
Fine Tuning Procedure
Follow steps 1 to 4 of Manual Tuning Procedure.
5 Press [43] (28) to select
[FINE] then press [2 1] (28) to
obtain the best tuning condition.
• Press [ENTER] (26) to return the
tuning to its former state.
6 Press [MENU] (9) to exit the On
Screen Display.
Blanking of Unused Programme Positions
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press [43] (28) to select [CLEAR] then press
[2 1] (28) to select [ON].
• Repeat steps 3, 4 for other unused programme positions
to skip during the selection of programme positions.
• To cancel the blanking of a programme position, select
that programme position then set [CLEAR] to [OFF].
5 Press [MENU] (9) twice to exit the On Screen Display.
6
CH 2 SEARCH 74
END: MENU
CH 2 AFC: ENTER
FINE : END: MENU