Samsung X60 Manual page 146

A4 Right-click the My computer icon, and select Manage. When the Computer
A5 In the case of Windows XP, click Advanced in the [Wireless Network Connection]
Q6 When connecting to a computer-to-computer (Ad Hoc) network,
A1 Make sure that the security settings and network name of the computer-to-com-
A2 Check the TCP/IP properties of the computers to be connected through the com-
Q7 When using a computer-to-computer (Ad Hoc) network,
A It may happen occasionally when you are using a computer-to-computer (Ad
Q8 Running Help file while running Profile Wizard in the wireless
A It will be displayed properly when you finish the profile wizard. It dose not affect
Manual
7-22
Management window appears, double-click Services and Applications on
the left, and then click Services from the sub menu tree. Select the Standard tab
in the right pane, double-click Wireless Zero Configuration and check that
Startup Type is configured to Automatic, and the Service status is Started.
dialog box (see p.4-8 'Connecting to an AP') and make sure that 'Use Windows
to configure my wireless network settings' is selected.
This may happen when a third-party wireless network setup program (e.g.
PROSet) other than Windows XP default program is installed. For setting up a
wireless network using the Windows XP program, this option should be selected.
I cannot connect to another computer connected to the same
computer-to-computer network.
puter (Ad Hoc) network is correct.
puter-to-computer (Ad Hoc) network. All of the computers to be connected
through a computer-to-computer (Ad Hoc) network should be configured so that
their IP addresses are within the same subnet range.
If the TCP/IP Settings are configured to DHCP, the address is automatically
configured to an address within the subnet IP range. This will take about 2~3
minutes.
If the IP address is configured to static IP in TCP/IP properties, select Use the
following IP address in the TCP/IP properties of the wireless adapter,
configure IP address:10.0.0.1~10.0.0.254, and Subnet mask:
255.255.255.0, and then try again.
A fixed IP is recommended for a small-size network.
sometimes I cannot search the access point.
Hoc) network connection. Even if you cannot find some access points, the
computer-to-computer (Ad Hoc) network is operating properly. Click Refresh to
view the latest search result.
LAN program (PROSet) makes the PROSet window white.
the program operation.