Samsung X11 Manual page 132

Q7 After connecting to a TV, some programs such as Debug, Mem,
A If a TV is used as the display device, some programs such as Debug, Mem, etc.
Q8 The Taskbar on the bottom of the screen does not appear when
A A This may happen, even though SXGA+ LCD supports the 1400°ø1050 mode,
Q9 Switching the MS-DOS command prompt to full screen mode or
A Pressing the <Alt>+<Enter> keys using an USB keyboard, may cause the key
Q10 When a TV is connected, the Turn off monitor power option is
A When connecting a TV after booting up your computer, the Turn off monitor
Q11 Pressing the shortcut key on the keyboard does not show the
A The Samsung Display Manager icon only appears when both the Magic
Manual
7-12
2. In the [Display Properties] window, select the Settings tab > Advanced >
GeForce Go xxxx tab.
3. Select the Full Screen Video menu> Full Screen Video Control item, set the Full
Screen Device to 'Auxiliary Display' and then click the Apply button. Then
you can view video on both the LCD and CRT display devices.
etc. do not run in full screen MS-DOS mode.
may not run properly in full screen MS-DOS mode. Run the programs in the MS-
DOS window.
a projector is used as the display device.
the projector does not support that mode. In this case change the resolution to
1024x768 (recommended) on your computer.
Windows mode by pressing the <Alt>+<Enter> keys does not
operate properly.
input to be recognized as multiple key inputs depending on the keyboard input
recognition time. In this case, the MS-DOS command prompt is repeatedly
switched to full screen and then to Windows several times. Please press the
<Alt>+<Enter> keys more quickly, or press the <Alt>+<Enter> keys using the sys-
tem keyboard.
not performed.
power option may not be performed. For it to operate properly, it is recommend-
ed to connect a TV and then booting up the computer.
Samsung Display Manager icon.
Keyboard and the Samsung Display Manager program are installed.