Panasonic DMC-FX90 Easy Setup Manual page 2

Send still pictures or motion pictures from
your camera to WEB services, AV device or a computer
Select [Easy Setup]
Setup
1
STEP
Camera operations
1
Turn the camera on and
touch [ ] to set Playback
Mode.
2
Touch [ ] to display the
menu screen.
3
Touch [ ] ([Wi-Fi Setup]).
Connect the camera to a wireless access
Connection
point (broadband router)
 If you are using a wireless access point (broadband router) that supports the WPS (Wi-Fi Protected Setup) (PUSH button function)*
* WPS is a function that allows connection and security related settings to be changed easily on wireless LAN devices. See the instructions of the wireless access point (broadband router) being used to check if it is
compatible or not. If you are using a wireless access point (broadband router) that does not support WPS (PUSH button function), read through the "Operating Instructions for advanced features (PDF format)".
Camera operations
1
Touch [WPS (Push-Button)].
When connecting with [Search Wireless AP]
1. Touch [Search Wireless AP].
2. Touch the wireless access point you are
connecting to.
3. Enter the encryption key and touch [Set].
• A message is displayed when the wireless access point (broadband router)
has been saved.
• Refer to the "Operating Instructions for advanced features (PDF format)" for details.
When [WEB service] is selected
Acquire a "LUMIX CLUB" login ID and
Setup
password with the camera
Register as a member of the "LUMIX CLUB" (free of charge). Registration allows still pictures or motion pictures to be sent to multiple WEB services via "LUMIX CLUB".
Camera operations
Read through the "LUMIX CLUB" terms of use and touch [Agree].
1
• You can change the page by dragging the screen left or right.
Enter a password and touch
2
[Set].
• Enter any combination of 8 to 16 characters
and numbers for the password.
Setting is
only required
the fi rst time.
4
Touch [Easy Setup].
5
Touch the icon for the
destination of the image.
• Touch [ ] ([Web Service]), [
device]), or [ ] ([PC]).
• When selecting [AV device ], touch [Home].
6
Touch [Next].
• Follow the on-screen instructions and make
the settings.
Setting is
only required
the fi rst time.
2
Press and hold down the
WPS button until the wireless
access point (broadband
router) goes into WPS mode.
• For further details, see the instructions of the
wireless access point (broadband router).
• A message will be displayed on the camera
when registration of the wireless access
point (broadband router) is complete.
Touch [OK] or [Next].
• Exit the menu after it is set.
( ( (Touch [ [ [ ] ] several times.) ] ) )
• To ensure reliable connection settings, it is
recommended to avoid covering the Wi-Fi transmitter
with your hand, and change settings near the wireless
access point (broadband router).
Wi-Fi Transmitter
Setting is
only required
the fi rst time.
Check the login ID, and touch
3
[OK].
• A message will appear when the connection has
fi nished. Touch [OK].
• Exit the menu after it is set.
(Touch [ ] several times.)
• You will need your login ID and password to reset. Please be sure to take a
note of them.
Login ID
Password
When [WEB service] is selected
WEB service user registration
Register
Registering the WEB services being used with LUMIX CLUB means still pictures or motion pictures can be sent to multiple WEB services at once.
Preparation
• Create an account to use in the WEB service (Facebook/YouTube etc.), set aside your login information.
Smartphone or PC operations
Connect to the "LUMIX CLUB" site.
1
• http://lumixclub.panasonic.net/eng/c/
Enter the
2
Login ID
password
] ([AV XXXXXXXXXXXX
Password
●●●●●●●●●●●●
• Enter the login ID using only numbers.
Select still pictures or motion pictures and send them
Send
from your camera
When sending images to a [PC]
Preparation
•
•
Select multiple still pictures or motion pictures and send them

• Images saved on the built-in memory cannot be sent. Copy the pictures to a card
before sending.
Camera operations
1
In Playback Mode, touch
[ ].
2
Touch the image you want to
send (repeat).
• Touch the same image again to cancel the
selection.
• The page can be changed by touching
[ ]/[
3
Touch [Set].
• Still pictures or motion pictures can also be
sent by dragging selected items upward.
3
email address
XXXXXX@XXXXX
Select the WEB service you wish to use and register it.
4
login ID and
• Follow the on-screen instructions to carry out the registration.
• Check the "FAQ/Contact us" on the following site for compatible WEB services.
you acquired using
http://lumixclub.panasonic.net/eng/c/
.
Install "PHOTOfunSTUDIO 6.4 HD Lite Edition with Wi-Fi" on the CD-ROM (supplied).
Refer to the "Basic Operating Instructions" (P28) for further information on operating environments or installation.
Refer to the operating instructions of "PHOTOfunSTUDIO 6.4 HD Lite Edition with Wi-Fi" (PDF) for further information
on the save destination of still pictures or motion pictures sent to computers.
Turn the computer power ON.
4
5
6
].
7
The name of the send
destination of this computer is
"Pfs-XXXXXX".
Refer to the "Operating Instructions for advanced features (PDF format)" for details.
Setting is
only required
the fi rst time.
Register your email address.
• A registration confi rmation email will be sent to
the registered email address. Click the URL link
included within the email.
Touch [Send now over Wi-Fi].
Save the selected pictures you plan to send. Select
this function to send pictures later, or to use the upload
tool (LUMIX Image Uploader) to send pictures to WEB
services.
Touch the picture destination
icon and move it to the front.
Touch [List].
• Equipment that can be connected and a
WEB service list will be displayed.
• When selecting [AV device], touch [Home].
Touch the destination name
and touch [OK].
• When [WEB Service] is selected, multiple
names can be selected. The selection will be
cleared by touching the name again.
• A message will appear when the image has
been sent. Touch [OK].