Completing The Set Up; Using The Control Panel; Operating Your French Door Refrigerator - Samsung French Door Refrigerator User Manual

4. Turn water on and check for any leakage. If you
find water drops or leakage in the connection
areas, turn off the main water supply. Check the
connections and, if nescessary, tighten.
Only connect the water line to a drinkable
water source.
If you have to repair or disassemble the water line,
cut off 6.35mm of the plastic tubing to make sure
you get a snug, leak-free connection.

Operating your French Door Refrigerator

uSING ThE cONTROl pANEl

1
2
3
DA68-02481C(EN)-0.0.indd 11

cOMplETING ThE SET up

Now that you have your new refrigerator installed in
place, you are ready to set up and enjoy the features
and functions of the appliance. By completing the
following steps, your refrigerator should be fully
operational.
1. Make sure your refrigerator is in an appropriate
2. Once the refrigerator is plugged in, make sure the
3. Set the Temperature control to the coldest
4. After you plug the refrigerator in, it will take a few
10
7
location with reasonable clearance between it and
the wall. Refer to installation instructions in this
manual.
interior light comes on when you open the doors.
temperature and wait for an hour. The freezer
will get slightly chilled and the motor will run
smoothly. Reset the refrigerator and freezer to the
temperatures you want.
hours to reach the appropriate temperature. You
can store food and drinks in the refrigerator after
the temperature is sufficiently cool.
9
8
4
5
6
operating _11
2011.4.1 8:44:7 AM