Safety Instructions; Basic Safety Instructions - Silvercrest SL 65 Operating Manual

Safety Instructions

Please read the safety instructions carefully before operating the
receiver.
Please follow all warnings and instructions on the equipment and in
the operating manual.

Basic Safety Instructions

Electrical connection
• Do not expose the receiver to rain as well as any kind of humidity
to avoid risk of fire and electric shock.
• Never open the casing. Otherwise, there is a risk of electric
shock.
• Connect the receiver only to a professionally installed mains
socket of 100–240 V, 50–60 Hz.
• The total power consumption by the antenna connection of the
receiver "LNB IN" must not exceed 350 mA.
• Pull out the mains plug from the socket if the equipment is not in
use for a longer period of time. Always pull out only the mains
plug.
• If foreign bodies or fluids enter the receiver, immediately pull out
the mains plug from the socket. Ask a qualified person to check
the equipment before operating it once again. Otherwise, there is
a risk of electric shock.
• Ensure that the power source (socket) is easily accessible.
• Do not bend or crimp the mains cable.
• If the mains cable is damaged, the receiver must be repaired by
an expert before reusing it. Otherwise, there is a risk of electric
shock.
• Never allow children to operate the receiver or to play with the
antenna unit unless supervised.
• Always ask qualified personnel to carry out maintenance jobs.
Otherwise, you are putting yourself as well as others at risk.
5