Table of Contents
Advertisement
•
Click Start and click Run. Type muisetup.exe in the Open box and click OK. A list of languages that can be installed is
displayed as shown below. Log on as an administrator.
•
Select the language you want to install and click Install from the File menu. The installation will begin. Log on as an
administrator.
You can delete an original language pack using the Delete menu in the File menu.
This operation deletes the original language pack only and does not delete the copy installed on your WES Client.
Recover the System
Overview
The WES Client provides a recovery function which allows you to revert to a backed up system when encountering a serious
problem. You can back up an OS image which is working normally to USB memory or the PXE server. You can revert to a
backed up image when your client has one of these problems:
•
When a system file is deleted accidentally or is corrupted
•
When the client computer is unstable or there is a problem with a device driver
•
When problems occur, after installing a new program or device
•
When the client computer is infected with a virus
•
When Windows Embedded Standard fails to start
How to Recover the System
•
Recovery Using USB Memory
By following these steps, you can save all necessary files to USB memory, and boot up with the backed up system on the
USB memory and recover the system.
•
Perform system formatting for your USB memory in order to make it bootable.
•
Save the Windows Embedded Standard image and the Backup/Recovery Utility which will be recovered later to your
USB memory.
•
Boot up with the USB memory.
•
Recover the system using the Windows Embedded Standard image and the Backup/Recovery Utility in the USB
memory.
•
Recovery Using Network Booting
This method is provided through the PXE (Preboot eXecution Environment) server. The PXE sever provides a client/
server interface based on TCP/IP, DHCP, and TFTP. It allows an administrator at a remote location to configure and boot
the operating system onto a client over a network.
•
Implement a PXE server.
•
Save the Windows Embedded Standard image and the Backup/Recovery Utility which will be recovered later onto the
4-1
Installing the Software
Advertisement
Table of Contents
