Pairing Bluetooth Devices - Samsung SPH-I325 ACE User Manual

2.
Use either the thumbwheel or navigation key to
scroll down the My Information Manager page to
review the
Device Address
device.

Pairing Bluetooth Devices

Pairing Devices
The Bluetooth pairing process (bonding) allows you to
establish trusted connections between your device and
another Bluetooth device. When devices are paired, a
passcode is shared between devices, allowing for fast,
secure connections while bypassing the discovery and
authentication process.
Note When pairing your device to other Bluetooth devices,
ensure that your device is not connected to your
computer via a USB cable.
To pair your phone with another Bluetooth device:
1.
Confirm that Bluetooth is enabled. (See "Turning
Bluetooth On and Off" on page 121.)
2. Press
Start > Settings > Connections > Bluetooth
126 Section 2J. Bluetooth
Bluetooth uses for your
.
3.
Select
Add new device..
will display a list of discovered in-range Bluetooth
devices.)
Bluetooth-capable computer
Bluetooth-capable printer
Bluetooth headset
Bluetooth-capable phone
4. Select a device and press
5.
Use the keypad to enter a passcode and press
(left softkey). (An onscreen message will tell
Next
you if the connection was made successfully. If the
connection failed, please confirm the device is
functioning correctly and repeat steps 3 and 4.)
6.
Use the keypad and
for the Bluetooth device and press
softkey).
and press . (Your device
(left softkey).
Next
to enter a display name
Next (left