Countermeasure To Remove Anything Clogging The Cleaner - Samsung SS7500 Series User Manual

maintain tools and fi lter
Maintaining the fi lter
• Do not dry it near a microwave or fi re.
• Do not clean it by putting it into a washer or using an unapproved detergent. (See
CAUTION
page 5).
• After cleaning, dry it completely in the shade.
- If you use the fi lter when it is not completely dried
- Moisture or water may enter the motor and cause a problem.
- The dust and moisture in the inlet solidifi es and this drastically decreases the
sucking power.
- The fi lter may smell.
• Dry the part in the shade as drying it in the sun for a long time may deform or discolor
it.
COUNTERMEASURE TO REMOVE ANYTHING CLOGGING THE
CLEANER
• To prevent clogging while using the cleaner, avoid vaccuuming big or sharp objects such as toothpicks,
blades, socks, etc.
• If the cleaner is clogged while in use, the sucking power may decrease and a vibrating sound may be
heard. In this case, remove the item clogging the product.
• If a foreign object is caught while you use the product, the drum will not rotate. In this case, turn the
power of the cleaner off and remove the object.
• Since the safety device is activated in this case, please operate the product again after about 10
seconds.
1. Press the button to separate the air inlet and then separate
the air inlet from the main body.
2. Press the air inlet cover fi xing hook and separate it.
3. Hold the end of the drum where there is no belt and lift it up.
14_ maintain