Specific Safety Rules - Central Machinery 94029 Assembly And Operating Instructions Manual

1hp mini dust collector

Hide thumbs

Table Of Contents

Table of Contents

21.

Maintain tools with care. Keep cutting tools sharp and clean. Properly

maintained tools with a sharp cutting edge are less likely to bind and are easier

to control. Do not use a damaged tool. Tag damaged tools "Do not use" until

repaired.

22.

Check for misalignment or binding of moving parts, breakage of parts,

and any other condition that may affect the tool's operation. If damaged,

have the tool serviced before using. Many accidents are caused by poorly

maintained tools.

23.

Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may become hazardous

when used on another tool.

24.

Tool service must be performed only by qualified repair personnel. Service

or maintenance performed by unqualified personnel could result in a risk of injury.

25.

When servicing a tool, use only identical replacement parts. Follow

instructions in the "Inspection, Maintenance, And Cleaning" section of this

manual. Use of unauthorized parts or failure to follow maintenance instructions

may create a risk of electric shock or injury.

Always wear ANSI-approved safety impact eye goggles, hearing protec-

tion, and a dust mask or respirator when operating this product.

The sound rating for this product is 107-112 dB. The operator should al-

ways wear ANSI-approved hearing protection when using this product.

WARNING!

Impeller (20) that can amputate fingers, grab loose clothing and long hair, and

propel sawdust at high velocities. NEVER operate this product without the Inlet

Cover (25), Safety Screen (26), and all other parts in place and working properly.

(See Assy. Diagram.)

CAUTION!

acceptable limits, you must regularly monitor airborne sawdust and maintain the

Dust Collection system to avoid exceeding dust limits. Each application is

unique, and your maintenance schedule must be tailored to your specific use of

the Dust Collector.

SKU 94029

For technical questions, please call 1-800-444-3353.

SERVICE