Central Machinery 45794 Assembly And Operating Instructions

Harbor freight tools dust collector system assembly and operating instructions

DUST COLLECTOR

Assembly AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

SYSTEM

Model 45794

Table of Contents

Need help?

Do you have a question about the 45794 and is the answer not in the manual?

Page 1 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright © 2001 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Page 2 Keep children away. Children must never be allowed in the work area. Do not let them handle Dust Collector. Store idle equipment. When not in use, Dust Collector must be stored in a safe location out of reach of children.
Page 3 When unpacking, check to make sure the following parts are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. 1 Dust Collector Bag (Push snaps sewn in)
Page 4 Note: This Dust Collector fits perfectly on Harbor Freight Tool’s Universal Tool Stand, Sku# 7769. It may fit on other 10” Table Saw or Scroll Saw metal stands. 1. To fit onto tool stand, line up the snaps on the collector bag with base of your tool stand.