Data Security; Set-Up Location; Set-Up Location - Medion Notebook Manual

Hide thumbs Also See for Notebook:
Table of Contents

Advertisement

• To avoid damage to the TFT Display, never open it a full
120º. Do not forcibly open it.
• In order to avoid damage to the display, do not touch it
with your fingers or sharp objects.
• Never lift the notebook by the TFT Display; doing so could
break the hinges.
Switch off your PC immediately or do not switch it on at all
and contact customer service ...
• ... if the power cord or the connectors attached to it are
burnt or damaged. Replace the defective power cord with an
original power cord. Under no circumstances may a defec-
tive power cord be repaired.
• ... if the housing of the PC is damaged or fluids have
leaked into it. Have the PC checked by customer service
first, because the PC may not be safely operated otherwise
and there may be a life-threatening risk of electrocution!

Data Security

• The supplier does not assume liability for data loss or dam-
age to data storage units, and no claims can be accepted for
damages resulting from the loss of data or consequential
losses.

Set-Up Location

• Keep your notebook and all connected peripherals away
from moisture, dust, heat and direct sunlight. Failure to
do so can lead to notebook malfunction or damage.
• It is highly recommended you do not use the notebook
outdoors.
• Operate the notebook and all peripherals on a stable, bal-
anced and vibration-free surface.
• Do not leave the base of your notebook on your lap or any
part of your body for a long period of time. The notebook
can become very warm while it is turned on or charging and
can cause discomfort or injury from heat exposure.
4
Safety and Maintenance

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Notebook and is the answer not in the manual?

Questions and answers

Table of Contents