Hpmed; Set Up; Preparation; Instructions For Use - POLTI CIMEX ERADICATOR Usage Instructions

pact on the environment and human health
and promotes recycling of the materials mak-
ing up the product.
Unlawful disposal by the owner involves the
application of the administrative sanctions en-
visaged by current legislation.
Before leaving our factory all our products are
rigorously tested. For this reason, your Cimex
Eradicator may contain some residual water
in the boiler from the testing.
The characteristics of HPMEd make it the ideal aid
to the action of dry saturated steam at high tempe-
ratures delivered by Cimex Eradicator.
Adding HPMED to the steam flow delivered by Ci-
mex Eradicator allows the removal of eggs, orga-
nic traces due to bed bug faeces and the complete
elimination of the characteristic bed bug odour
from surfaces.
Instructions for use: Fit the disposable bot-
tle into the delivery device following the in-
structions in paragraph "INSTRUCTIONS
FOR USE".
Switch on the machine following the manufactu-
rer's instructions. Once the system is ready, di-
stribute the steam and HPMED. Mixed with the
steam, the product will normally dry within 30 se-
conds to one minute, depending on the environ-
mental conditions.
Warnings: Keep out of the reach of children. Do
not ingest. In case of contact with eyes, rinse
with plenty of water and seek medical advice.
HPMED is a cleaning product for hard surfaces.
Contains <5% non-ionic surfactant. (EEC Reg.
648/2004)
Before using Cimex Eradicator for the first
time assemble the pivoting wheels (5) as indi-
cated in the fig. A.
CIMEX ERADICATOR
• Unscrew the safety cap (B) and fill the boiler
with 2 litres of water using the filler bottle (7)
(fig. 1).
Ordinary tap water may also be used.
However, since water contains limestone by
nature, which may cause scaling in the long
run, we recommend using a 50/50 mixture
of tap water and demineralised water. To
use tap water only and avoid scale forma-
tion, we recommend the addition of special
natural descaling agent KALSTOP FP 2003.
• Carefully screw the cap back in fully (fig. 2).
Ensure that the safety cap (B) is correctly fa-
stened. If not, steam could escape from the
opening.
• Plug the power lead (I) into a suitable socket
with an earth connection.
WARNING: Do NOT under any circum-
stances put or leave the filler bottle in the wa-
ter filling aperture of the appliance when the
appliance is connected to the mains electric-
ity supply. Danger of burns!
• Press down the generator on/off switch
(F) and the accessories on/off switch (A)
wich will light up together with the pres-
sure indicator light (G).
• Wait until the steam pressure indicator light
(G) goes out. Cimex Eradicator is now ready
for use.
• Open the cover of the central connector
block(P); and insert the central connector
(R) pressing the connector button (S) and
taking care that the locking tab (Q) is cor-
rectly positioned in the lock-in aperture (U)
on the block (fig. 3).
• Unscrew the cap of the disposable bottle
(2) (fig. 5).
• Insert the stopper (3) into the disposable
bottle (fig. 6), until it rests on the base of
the bottle, ensuring that it stays as straight
as possible (fig. 7).
• Screw the bottle into the bottle fitting,
taking care to ensure that the stopper en-
45