Setting The Sensitivity & Cleaning Cycle; Power Failure - Samsung AC45EP0E Owner's Instructions Manual

Setting the Sensitivity & Cleaning Cycle
You can set the sensitivity of the pollution detection sensor and
cleaning cycle of filters.
1 Turn the air cleaner off, then open the front grille.
2 Set the sensitivity by adjusting the sensitivity switch.
(Sensitive) : The sensor senses minute particles and
(Insensitive) : The sensor senses pollutants when indoor air
3 Set the replacing/cleaning cycle of filters.
If you select LONG, you can use the Ionizer filter for about
4 months, the deodorizing filter for about 5 months. If you select
SHORT, you can use the Ionizer filter for about 3 months, the
deodorizing filter for about 4 months.
For details of cleaning filters, refer to pages 14~16.

Power Failure

1 If a power failure occurs when the air cleaner is operating, the unit is switched
off. When the power returns, you must press
tobacco smoke.
becomes very impure.
(On/Off) to restart it.
13