PROBLEM
Error is indicated.
Noise is generated.
Smoke is generated from
the outdoor unit.
Water is dropping from
the outdoor unit piping
connection.
Indoor unit display
indicates "
"
Australia_AQV30T@_IB&IM_33367A_E.indd 23
SOLUTION
• When an indoor unit indicator blinks, contact the nearest service center.
• D epending on the status of the air conditioner usage, noise can be heard when refrigerant
flow movement changes. It is normal.
• I f may not be a fire but it can be a steam generated by the defrost operation from outdoor
heat exchanger during Heat mode in winter.
• Water may be generated because of the temperature difference. It is normal.
• This is not a defect. If the air conditioner receives a Demand Response signal from the
power supply utility, then the compressor and fans will stop. The indoor unit display will
indicate "
".
23
2012-6-29 9:20:03