Removing The Transport Bolts - Hitachi HWF-800X Instruction Manual And Installation Instructions

Removing the
transport bolts
Before removing the
transport bolts
Removing the transport
bolts
Storing the transport bolts
40
Caution
The transport bolts must always be removed before
using the appliance for the first time.
1. Take the hose out of the holders.
2. Detach the elbow.
3. Release all four transport bolts using the SW 13
wrench until they can be moved freely.
4. Completely remove transport bolts by reaching
through the open washing machine door and
pulling the drum forwards slightly.
5. Insert the covers.
Always keep the transport bolts for subsequent trans
portation of the appliance (e.g. when moving house).
q Store the transport bolts with washer and bush
(and spring) attached.