Table of Contents
Advertisement
Changing
the cooking
time
You can change
the cooking
time during the cycle.
1. Touch CHANGE/CANCEL
Pad once. (Note: The oven will go off and the Display
will show a COlOn.)
2. Touch numbers
for new time.
3. Touch START.
The COOK 1 cycle
will start cooking
for the new time.
Cooking at lower cook powers
For best results, some recipes
call for lower Cook Powers. The lower the Cook Power,
the slower the cooking.
Each Number
Pad on your microwave
oven stands for a different
percentage
of Cook Power (IO%, 50%, BO%, etc.). Many recipes
in your MICRO MENUS@
Cookbook
tell you, by name, which Cook Power to use. Recipes
in other books and
magazines
may tell you by number
(5,6, 7, etc.).
The following
chart gives you the percentage
of Cook Power each Number
Pad stands
for, and Cook Power name generally
used.
automatic
100% of full power
HIGH
9 = 90% of full power REHEAT
4 = 40% of full power
8 = 80% of full power
MED-HIGH
3 = 30% of full power MED-LOW
7 = 70% of full power
2 = 20% of full power
6 = 60% of full power
MEDIUM
1 =
10% of full power WARM
5 = 50% of full power
DO THIS...
1.
Put food in the oven and
close the door.
2. Touch COOK I& 2 once.
3. Touch Number
Pads for
the cooking
time you
want.
4.
Touch COOK POWER.
0 = no power (fan and light
will be off)
THIS HAPPENS...
The COOK1 Signal Light will come
on and the Display
will show a
colon.
The Display
will show the numbers
you touched
In the order
you
touched
them. This example
shows
7 minutes, 30 seconds.
The COOK POWER Signal Light
will come on and the Display
will
show "HI:'
The Display
will show what you
touched.
This example
shows 50%
of full power.
5. Touch a Number
Pad for
the Cook Power you want.
Advertisement
Table of Contents
