Setting The Clock - Whirlpool MH6700XM Use & Care Manual

Number pads
Cooktop fan and light controls
The two switches at the bottom of the control
panel control the 2-Speed Exhaust Fan and the
fluorescent Cooktop Light.
Once you've touched a Command Pad
to tell the oven what you want it to do, you'll
touch Number Pads to tell it...
- a time,
- a Cook Power,
-a food temperature.
Press the Exhaust Fan switch to the right for
HIGH, to the left for LOW and center it to turn OFF.
(NOTE: If the temperature gets too hot around
the microwave oven, the exhaust fan in the
vent hood will automatically turn on or
change to the HIGH setting to protect the
oven. It may stay on up to an hour to cool the
oven. When this occurs, the Exhaust Fan
switch will not turn the fan OFF.)
Press the Cooktop Light switch to the right to
turn the light ON. Press switch to the left to turn
it OFF.
Setting the clock
You can cook without setting the clock, but the Display will show a colon for 5 minutes
afterthe cooking is done, then go blank.
THIS HAPPENS...
DO THIS...
1. Touch CLOCK SET.
2.
Touch CHANGE/CANCEL
Pad once.
The CLOCK Signal Light will come
on and the Display will show a colon.
The CLOCK Signal Light and the
colon will blink once.
The Display will show what numbers
you touched in the order you touched
them. This example shows 3:25.
3. Touch Number Pads for
the correct time of day.
The Display will show the time of
day, and the CLOCK Signal Light
will stay on.
4.
Touch START.
If you have touched in an incorrect
time such os12:65, the Display will
go blank and you will hear a beep.
Reset the Clock.