Table of Contents
Advertisement
Basic Operations
Adjusting the Volume
Using the volume buttons (VOL-and VOL+)
Press the
VOL + VOL- increase decrease
or
to
Using the Mute
Using the MUTE button
At any time, you can temporarily turn off the sound using the
1
Press the
MUTE
button and the sound turns off.
2
To turn mute off, press the
Select input source signal
Using the INPUT button
1 1
Press the
INPUT
button to access
2
3 4
Press
or
to select a desired input channel.
3
Press
OK
to confirm and the unit display signal from the selected input channel.
A
----------VGA, select signal from VGA(15-pin D-sub) terminals.
D
----------DVI, select signal from DVI terminals.
C1
--------YPbPr1/
YCbCr1
C2
--------YPbPr2/
YCbCr2
AV
--------VIDEO (SVIDEO), select signal from S-Video or Video terminal.
The S-Video is prior to Video terminal when they are connected at the same time.
Note:
This unit identifies the type of component video terminals automatically. If you connect
detected
on the bottom-right corner. Similary, if the component video terminals are
bottom-right corner.
Using source select menu
1
Press
MENU
to display the menu main page.
2
3 4
Press
/
to display
3
6
Press
repeatedly to select
4
4
Press
to access
source select
5
5 6
Press
or
to select a desired input channel.
6
Press
OK
to confirm and the unit displays signal from the selected input
channel.
17
or
the volume.
MUTE
MUTE
button again, or simply press either the
source
menu.
, select signal from YPbPr1/
YCbCr1
, select signal from YPbPr2/
YCbCr2
settings
menu page.
source select
item.
menu.
button.
VOL - VOL+
or
.
source
terminals.
terminals.
Y, Cb, Cr
Y, Pb, Pr
,
the screen displays
menu background
language
close caption mode
close caption
close capt. background
source select
A
D C1 C2 AV
VGA
terminals,
the screen displays
YPbPr detected
settings
opaque
English
cc1
off
on on mute
opaque
right/left to source select
YCbCr
on the
Advertisement
Table of Contents
