Basic Operation - Polaroid PLA-4255BD Operation Manual

Basic Operation

Turning on the power
Check that the AC switches on the back of the PDP and the Set-Top Box are
turned to "I".
1. Press PWR on the Plasma Display and Set-Top Box. The power LED on PDP
and Set-Top Box light up in red to indicate standby mode.
2. Confirm that the STANDBY indicators light up red, and then press TV on the
remote control unit or STANDYBY/ON on the right side of Plasma Display to turn
the system on. The POWER ON indicators on the Plasma Display and Set-Top
Box light up blue.
Note
In this manual, "system" means the Plasma Display Panel and the Media
Receiver (Set-Top Box).
Turning off the power
Press PWR button on the remote control or STANDBY/ON button on the right
side of the PDP. The power LEDs on the PDP and the Set-Top Box turn red to
indicate standby mode.
CAUTION
Before disconnecting any system cables, turn the PDP off (put into Standby
Mode) and turn the AC switches to "0".
Note
If the PDP is not to be used for a long period of time, unplug the AC cord from the
wall outlet.
15