C
ONGRATULATIONS
the manual and those marked on the product
device. Also, remember to keep this User's Manual in a convenient location for future reference.
Important: Save the original box and all packing material for future shipping needs.
Installing a flash media card
1. Find the slot that fits your flash media card.
2. Insert the card in the correct slot.
3. To remove the card, simply push it in slightly
until it springs back out. Remove.
Power
AV Out
Design and specifications are subject to change without notice.
MS/SD/MMC Card
Replacing the Remote Control Battery
1.
Remove the battery compartment by pulling the cover in the direction of the arrow.
2. Remove old battery and dispose of correctly.
3. Insert new battery taking note of correct polarity (+/-).
4. Replace cover.
Caution:
1.Only use a 3V CR2025 battery.
2.Dispose of used batteries according to local ordinance regulations.
3.Remove the battery when not using the Flash Player for prolonged periods.
1
on your purchase of a Polaroid digital photo frame. Please read carefully and follow all instructions in
before
first use. Failing to follow these warnings could result in personal injury or damage to the
SM Card
CF/MD Card
Press & Hold Function:
When you press and hold a button for 3
seconds or more it activates an additional
function.
Play/pause (when viewing photos)
Press
Play/pause
Press & Hold
Enters "Menu" from any mode.
Rotate (when viewing photos)
Press
Rotates the picture
Press & Hold
Slideshow with music background
Up arrow
Press (when viewing photos)
Show previous picture
Press (under music slideshow mode)
Increase music volume
Press (under Menu operation)
Move up or go to previous
Press & Hold
Adjusts slide show interval time
Down arrow
Press (when viewing photos)
Shows next picture
Press (under music slideshow mode)
Decreases music volume
Press (under Menu operation)
Move down or go to next
Press & Hold (when viewing photos)
Transition mode selection
Power
Turns power on/off
Need help?
Do you have a question about the DIGITAL PHOTO PICTURE FRAME and is the answer not in the manual?
Questions and answers