Timing More Than One Film; Removing Film For Later Processing - Polaroid 545 PRO User Manual

Type55P/N film, the negative
serves no further purpose.
Discard it with the envelope.
Avoid contact with the
chemical on the negative.
This process uses a caustic
paste. Avoid contact with
skin, eyes and mouth and
keep away from children and
animals. If you get paste on
your skin, wipe it off
immediately and wash with
water to avoid an alkali
burn. If eye or mouth contact
occurs, quickly wash the area
with plenty of water and see
a doctor. Keep discarded
materials away from children,
animals, clothing and furniture.
Type 55P/N film only: Use
your left thumb to hold down
the negative. With your right
hand, quickly peel away the
print and thin paper mask.
Pull hard, and the print and
mask will separate
completely from the negative
section and cap. Remove
the mask from the print and
discard the mask. Complete
instructions on removing the
negative from the envelope
and preparing it for
enlargement are in the film
instructions.

14 Timing more than one film

The film processing timer has
the ability to time up to three
Polaroid Instant films
simultaneously. The display
indicates the timer countdown
of the first processed film by
displaying the digit 1 to the
right of the time display.
On completion of this
development the timer
sounds a single beep and
displays the second film's
remaining process time.
The timers sounds a double
beep on completion of the
second film's process time
and so on until all film
process times are complete.
15 Removing film for later
processing
a After exposure, re-insert the
envelope; push it in very
firmly to ensure that it
engages the metal cap at the
end of the negative. Do not
move the control arm to P.
Leave it at L.
b Remove the film holder from
the camera. Depress the film
English 9