Loading The Film - Polaroid 545 PRO User Manual

c If you wish to manually switch
off the timer, press the mode
button at this point and the
display will power down.
Alternatively, to change the
time out period, press the
scroll button to toggle through
the auto off settings. The
timer can be set to power
down after 1, 5, 15, 30
minutes or 1 hour. if no user
intervention occurs
d Press the mode button to
save the auto off time.
10 LCD Backlight
The timer comes with an LCD
backlight to operate this
press and hold the blue
button (1k) below the display.
When the button is not
depressed the backlight will
go off.

11 Loading the film

a Move the control arm to L (2).
b Hold the envelope as shown
(3) and insert the metal clip
end into the holder. Be sure
that the side marked THIS
SIDE TOWARD LENS faces
the lens. Do not hold the
envelope by the end when
first inserting it into the
holder, as you may buckle
the envelope (4) and damage
the film. Do not press on the
area marked DO NOT
PRESS HERE where the pod
of developer chemicals is
located.
c Push the envelope in halfway
(5), then shift your grip to the
end, and push it in the rest of
the way (6). When the
envelope is fully inserted the
timer will display a film
engaged symbol in the top
right corner.
If this is not displayed, the
film is not engaged correctly.
Remove the film from the
holder and repeat the
process. Note that if film is
loaded and no user
intervention of the timer
occurs for more than 4 hours,
the engaged symbol will
disappear from the display.
English 7