Table of Contents
Advertisement
4
Attaching the holder to the
camera
Before use, open the roller
cover and inspect the
processing rollers. Clean
them if necessary (see
section 16 Cleaning the
rollers ). Slide the holder into
the back of the camera, just
as you would a standard film
holder. If your camera has
slide locks, use them in
addition to the spring back;
the locks fit into slots on the
sides of the film holder.
5
Determining the processing
time
The processing time for any
exposure is dependent on the
film type. Each Polaroid film
type has a two digit timer
code which can be found on
the film packaging, on the
film holder or in the table on
the previous page. This timer
code has to be entered
manually into the timer:
a
Press the mode button until
the film timer code icon is
displayed.
b
Pressing the scroll button will
cause the left digit to flash.
c
Pushing the scroll button
again will rotate the numbers
from 0 to 9.
d
When you have reached the
desired number press the
mode button and the right
digit will flash.
e
Repeat step c. Once the
correct film timer code is
displayed, press the mode
button to save the selection.
6
Displaying the ambient
temperature
a
Press the mode button until
the temperature icon is
displayed.
b
Pressing the scroll button
changes the display from °C
to °F.
English
5
Hide quick links:
Advertisement
Table of Contents
