You can change the default settings of this unit to customize its performance to your own preferences.
Note: Program the system while playback is stopped completely or there is no disc in the payer.
To set up your system:
1.
Press the SETUP button and the setup menu will appear on the screen. Press the direction buttons to select a
sub-menu to program.
2.
In the sub-menu, use the
3.
Press the SETUP button again to exit the setup menu at any time during setting.
General Setup
System Setup
button to highlight your selection and press the ENT/ENTER button to select.
TV TYPE
•
This item is used to set the TV display mode.
•
Press the
•
Press the
•
It includes 4:3 PS, 4:3 LB, and 16:9.
•
Press the
•
Press the ENT/ENTER button to confi rm your selection.
•
Press the
Note: Select 4:3 PS or 4:3 LB when a 4:3 TV is connected. Select
16:9 when a 16:9 wide screen TV is connected.
OSD LANGUAGE
•
This item is used to set the OSD (on-screen display) language.
•
Press the
•
Press the
•
There are several languages for you to choose.
•
Press the
•
Press the ENT/ENTER button to confi rm your selection.
•
Press the
ANGLE MARK
•
This item is used to set the angle mark on or off.
•
Press the
•
Press the
•
Press the
•
Press the ENT/ENTER button to confi rm your selection.
•
Press the
28
buttons to highlight this item.
button to access.
buttons to choose the desired language.
button to exit.
buttons to highlight this item.
button to access.
buttons to choose the desired language.
button to exit.
buttons to highlight this item.
button to access.
buttons to select ON or OFF.
button to exit.