You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be fol- lowed to reduce the risk of personal injury and damage to equipment.
Page 3
applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended. Use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips.
When unpacking, check to make sure the following parts are included. 1) Air Filter / Regulator 2) Lubricator 3) Double-sided Fitting If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.
Turn the Lubricator Body clockwise, tightening the Fitting to the Air Filter Body (12) and the Lubricator Body (A7). Note that the arrows imprinted on top of each body should be pointing all in the same direction. Align both bodies so that their bowls are facing down. Attach the mounting support Holder (6) to the Air Filter if the assembly is to be mounted to a flat surface (Refer to the Assembly Drawings at the end of this manual).
Check oil level in Lubricator Plastic Bowl daily. Refill if below minimum level. Press on the Regulator Spring (14) button to expel any accumulated moisture in the Plastic Bowl (23). PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.
Page 7
Air Filter Assembly Drawing NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 40312 Page 7...
Page 8
Lubricator Parts List i s i c i t NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. When ordering parts from this list, add an “A” prefix to the part number illustrated in the Assembly Drawing.