Table of Contents
Advertisement
When unpacking, check to make sure the following parts are included.
1) Air Filter / Regulator 2) Lubricator 3) Double-sided Fitting
If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.
The diagram below shows the general connections for the Air Filter-Regulator and
Lubricator.
1.
Find the 1/4 inch, double-sided Fitting (27) and apply brass fitting compound
to both sides.
2.
Hand screw the Fitting into the Air Filter Body (12), right input side.
3.
Take the Lubricator Body (A7) and align its output connection to the Fitting
and hand screw the Fitting a few turns into the Lubricator Body.
Pressure Adjusting
Knob (3)
Holder (6)
Air Flow (from
Compressor)
Air Filter Body (12)
Quick Release Button
Metal Bowl Guard (26)
Regulator Spring (14) button
SKU 40312
Unpacking
Installation
Screw (1)
Fitting (27)
Page 4
To Air Tool
Lubricator Body (A7)
Quick Release Button
Metal Bowl Guard (A15)
Advertisement
Table of Contents
