Setup For Input Signals; Component / Rgb-In Select; Yuv / Rgb-In Select - Panasonic TH-42PH20ER Operating Instructions Manual

Setup for Input Signals

Component / RGB-in select

Select to match the signals from the source connected to the Component / RGB or PC input terminals.
Y, P , P signals "Component"
B R
RGB signals "RGB"
1
2
3
Note:
Make setting of the selected input terminal (COMPONENT RGB IN or PC IN).

YUV / RGB-in select

Select to match the signals from the source connected to the DVI input terminals.
YUV signals "YUV"
RGB signals "RGB"
1
2
3
Notes:
• Selection may not be possible, depending on which optional board is installed.
• Make setting of the selected input terminal (SLOT or DVI-D IN).
38
Press to display the Setup menu.
Press to select the "Component / RGB-in select".
Press to select the desired input signal.
Component RGB
Press to exit from adjust mode.
Press to display the Setup menu.
Press to select the "YUV / RGB-in select".
Press to select the desired mode.
YUV RGB
Press to exit from adjust mode.
Setup 1/2
Signal
Screensaver
Extended life settings
Input label
Component/RGB-in select
RGB
Power save Off
Standby save Off
PC Power management Off
DVI-D Power management Off
Auto power off Off
English ( UK )
OSD Language
Setup 1/2
Signal
Screensaver
Extended life settings
Input label
YUV/RGB-in select
RGB
Power save Off
Standby save Off
PC Power management
Off
DVI-D Power management Off
Auto power off
Off
English ( UK )
OSD Language