Component Video Output - Panasonic DMR-EH50 Quick Setup Manual

Connecting a television with AUDIO/VIDEO terminals and VCR
Connecting to the television using the 21-pin Scart leads (
To the aerial
1
Splitter
VHF/UHF
RF IN
Aerial
lead
RF coaxial lead
2
1
RF OUT RF OUT RF IN RF IN
AV1 ( TV )
AV2 ( EXT )
This unit's rear panel
Use a splitter if
you also want to
connect the aerial
to your VCR.
Red White Yellow
R L
VHF/UHF
AUDIO OUT VIDEO OUT
RF IN
Connecting a television with S VIDEO or COMPONENT VIDEO terminals
AUDIO IN VIDEO IN
R L
Red White Yellow
Audio/
Yellow
Video
RF OUT RF IN
cable
White
Red
S VIDEO OUT terminal
Connect to S VIDEO IN terminal on the television
through a S Video cable.
The S VIDEO OUT terminal achieves a more vivid
picture than the VIDEO OUT terminal. (Actual results
depend on the television.)

∫ Component video output

Component signal outputs the colour difference signals (P
colours. If the television is compatible with progressive output, a high quality picture can be output because this unit's component video output
terminal outputs a progressive output signal (
2)
indicates included accessories.
indicates accessories not included.
are required connections. Connect
4
in the numbered order.
Audio/Video cable
VIDEO VIDEO S VIDEO OUT S VIDEO OUT
Yellow
Yellow
L L
White White
AUDIO AUDIO
Red Red
S VIDEO S VIDEO
COMPONENT COMPONENT
R R
AV4 IN AV4 IN
(PROGRESSIVE/ (PROGRESSIVE/
AV4 IN AV4 IN OUT OUT
Audio/Video cable
You can also connect with the AV2 terminal
on this unit using the 21-pin Scart lead.
Television's rear panel
COMPONENT
S VIDEO IN
VIDEO IN
S Video
cable
VIDEO VIDEO S VIDEO OUT S VIDEO OUT
L
L
Y P P
B R
AUDIO AUDIO
OPTICAL OPTICAL
S VIDEO S VIDEO
COMPONENT COMPONENT
R R
AV4 IN AV4 IN
VIDEO VIDEO OUT OUT
DIGITAL AUDIO OUT DIGITAL AUDIO OUT
(PROGRESSIVE/ (PROGRESSIVE/
AV4 IN AV4 IN OUT OUT
INTERLACE) INTERLACE) (PCM/BITSTREAM) (PCM/BITSTREAM)
Note to owners of progressive compatible PAL system televisions (
/P ) and luminance signal (Y) separately in order to achieve high fidelity in reproducing
B R
69 of Operating Instructions).
BE SURE TO READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 2 IN THE OPERATING INSTRUCTIONS
BEFORE CONNECTION.
Television's rear panel
AUDIO IN VIDEO IN
R L
Red White Yellow
Connect only after all other
connections are complete.
3
Y P P
B R
OPTICAL OPTICAL
VIDEO VIDEO OUT OUT
DIGITAL AUDIO OUT DIGITAL AUDIO OUT
INTERLACE) INTERLACE) (PCM/BITSTREAM) (PCM/BITSTREAM)
Cooling fan
AUDIO IN VIDEO IN
R L
Red White Yellow
Audio/Video
cable
RF OUT RF IN
COMPONENT VIDEO OUT terminal
Connect to COMPONENT VIDEO IN terminal on the television through video cables.
These terminals can be used for either interlace or progressive output (
Operating Instructions) and provide a purer picture than the S VIDEO OUT terminal.
≥Connect to terminals of the same colour.
≥Video output from the component terminal will have no colour during EXT
LINK recordings. Use a fully wired 21-pin Scart lead between the TV and the
unit when viewing external equipment picture through the AV2 terminal.
≥Change the "AV1 Output" setting in the SETUP menu (
Instructions) to "Video (with component)" or "S-Video (with component)" after
tuning is completed ( 5, 6). If not, the picture will not be in colour.
For progressive output (
- 3 -
To household mains socket
(AC 220–240 V, 50 Hz)
AC mains lead
4
AC IN
VCR's rear panel
Television's rear panel
COMPONENT
S VIDEO IN
VIDEO IN
Video cable
S VIDEO OUT S VIDEO OUT
VIDEO VIDEO
Yellow
L
L
White
Y P P
B R
AUDIO AUDIO
OPTICAL OPTICAL
Red
S VIDEO S VIDEO
COMPONENT COMPONENT
R R
AV4 IN AV4 IN
VIDEO VIDEO OUT OUT
(PROGRESSIVE/ (PROGRESSIVE/ DIGITAL AUDIO OUT DIGITAL AUDIO OUT
AV4 IN AV4 IN OUT OUT
INTERLACE) INTERLACE) (PCM/BITSTREAM) (PCM/BITSTREAM)
59 of Operating
22 of Operating Instructions)
6 of Operating Instructions)
69 of