Panasonic DMR-EH50 Quick Setup Manual page 6

Auto-Setup (Setup without Q Link functions)
≥When connecting to a television with the VIDEO OUT, S-VIDEO OUT or COMPONENT VIDEO OUT terminal (
≥When connecting to a television that does not have the Q Link function (
This unit's Auto-Setup function automatically tunes all available TV stations and synchronizes the time when the TV channel that is broadcasting
time and date information is tuned.
≥When connecting to a television with RF socket only (
DVD
TV TV
Í
Í
VOLUME VOLUME
CH CH
DIRECT TV REC DIRECT TV REC
AV AV
HDD HDD DVD DVD SD SD
1 2 3
CH CH
4 5 6
VIDEO Plus+ VIDEO Plus+
9
7 8
CANCEL CANCEL INPUT SELECT INPUT SELECT
MANUAL SKIP MANUAL SKIP
0
SKIP SKIP SLOW/SEARCH SLOW/SEARCH
PAUSE PAUSE PLAY/x1.3
STOP STOP
ENTER ENTER
SUB MENU SUB MENU RETURN RETURN
CREATE CREATE
STATUS STATUS
AUDIO AUDIO ERASE ERASE
CHAPTER CHAPTER
A
B C
REC REC REC MODE EXT LINK REC MODE EXT LINK TIMER TIMER
DVD/TV DVD/TV
To stop partway
Press [RETURN].
∫ If the clock setting menu appears
Set the clock manually ( 61 of Operating Instructions).
∫ To confirm that stations have been tuned correctly (
∫ To restart Auto-Setup (
∫ To enter the satellite/digital terrestrial station's name (
The name of the satellite/digital terrestrial station is not set automatically. ("-- ---" will appear under "Name" in the program list). After Auto-Setup
is completed, enter the name manually.
∫ If you connect other equipment to AV2 terminal of this unit
Change the "AV2 Input" in the SETUP menu to match the connected equipment (
F0205VG1025
1
Turn on the television and select the appropriate AV
input to suit the connections to this unit.
2
Press [Í DVD] to turn the unit on.
Auto-Setup starts.
This takes about 5 minutes.
Auto-Setup
Ch
Auto-Setup in progress, please wait.
RETURN: to abort
RETURN
3
When Auto-Setup has completed, the Owner ID settings screen appears.
Press [1] and press the numbered buttons to enter a 4-
digit PIN number.
Owner ID
PIN number
Name
House No.
Postcode
RETURN
RETURN : leave
≥Make a note of the PIN number (don't forget), as it is not possible to return to the factory
preset.
4
Press [ENTER] twice to store the PIN number.
The cursor moves to "Name".
5
Press [1].
6
Press [3, 4] to select a letter and then press [1].
Repeat this to enter the name.
7
Press [ENTER] to store the name.
8
Press [4] and [1], and then repeat steps 6, 7 to enter
and store "House No." and "Postcode".
9
Press [RETURN].
The Owner ID settings screen disappears.
60 of Operating Instructions)
70 of Operating Instructions).
4)
(When connecting to a television with RF socket only)
Set the new RF output channel to TV (refer to the
instructions for your TV). Select an unused channel pre-
1
set on your TV and tune it to the RF output channel
number shown on the unit's display.
¢¢¢¢
60 of Operating Instructions)
60 of Operating Instructions)
59 of Operating Instructions).
- 6 -
3).