Setting The Clock - Samsung RCD-Y95 Instruction Manual

SETTING THE CLOCK

For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Turn on the power by pressing the STANDBY/ON button.
1
Press the TIMER CLOCK button twice.
Result: CLOCK is displayed.
2
Press the PROGRAM/SET button.
Result: The hour flashes.
3
To...
Increase the hours
Decrease the hours
4
When the correct hour is displayed, press
the PROGRAM/SET button.
Result: The minutes flash.
5
To...
Increase the minutes
Decrease the minutes
6
When the correct time is displayed, press
the PROGRAM/SET button.
Result: The clock starts and is displayed, even when the
system is in standby mode.
You can display the time, even when you are using another function,
NOTE
by pressing the TIMER CLOCK button once.
Press...
button
button
Press...
button
button
6
GB